Model	MD-U1020C
Type	Marking unit (controller + head) Wide area
Console	MC-P1 (sold separately)
2D code reader add-in	MD-XAD1/MD-XAD1A (sold separately)
Marking style	XYZ 3-Axis simultaneous scanning method
Marking laser	Type	YVO4 laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10) *1
Wavelength	355 nm
Output	3 W/40 kHz (output at focal point: 2.5 W)
Q-switch frequency	CW (continuous wave), 40 to 400 kHz
Guide laser / working distance pointer	Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part1040.10) *1
Marking area	330 x 330 x 42 mm
Standard working distance (±variation width)	300 mm (±21 mm)
Marking resolution	5 µm
Scan speed	Max. 8,000 mm/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font*2
Barcode	CODE39, ITF, 2of5, NW7 (Codabar) , JAN, CODE128, EAN, UPC-A, UPC-E, CODE93
2D code	QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
GS1 DataBar	GS1 DataBar, GS1 DataBar CC-A, GS1 DataBar Stacked, GS1 DataBar Stacked CC-A, GS1 DataBar Limited, GS1 DataBar Limited CC-A, GS1 DataBar Truncated, GS1 DataBar Truncated CC-A
Logo image	Custom character font and logo (DXF) data, BMP/JPEG/PNG/TIFF
Marking conditions	Marking style	Stationary marking, Moving marking (constant, encoder)
Character size (height ? width)	0.01 to 330 mm
Number of registered programs	2,000 max.
Number of blocks	256
Input / Output	Terminal block I/O, MIL connector I/O, contactor control I/O
Interface	RS-232C, USB2.0, Ethernet (100BASE-TX/10BASE-T) *3
Marking unit installation direction	All directions
Marking unit cable length	4.3±0.1 m
Cooling method	Forced air cooling
Rated voltage and power consumption	Single-phase 100 to 240 VAC±10 %, 50/60 Hz, 800 VA max.
Overvoltage category	II
Pollution degree	2
Enclosure rating	IP64 (marking head)
Environmental resistance	Operating ambient temperature	0 to + 40 °C
Operating ambient humidity	30 % to 85 % (no condensation)
Ambient temperature for storage	? 10 to + 60 °C (no freezing)
Ambient humidity for storage	30 % to 85 % (no condensation)
Weight	Controller: 23.5 kg Marking head: 18.0 kg Console: 2.0 kg
Compatible regulations	EU directive (EMC directive, low-voltage directive, RoHS directive), EN standard (EN 55011, EN 61010-1, EN 60825-1, EN 61000-6-2, EN 50581), CSA and UL standards (CAN/CSA C22.2 No. 61010-1, UL 61010-1), North America regulations (FCC Part 15B, ICES-001 Class A)
1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. 2 The only TrueType and OpenType fonts supported are those fonts whose “Font embeddability” property is set to “Installable” or “Editable.” This property can be viewed from the Properties dialogue boxes of the fonts shown on the [Fonts] screen in [Control Panel] . *3 There are two USB ports : a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder 3 (ActiveX) . The Ethernet port supports communication with Marking Builder 3 (ActiveX) , TCP/IP communication, EtherNet/IPTM and PROFINET. PROFINET is either a registered trademark or a trademark of PROFIBUS Nutzerorganisation e.V. EtherNet/IPTM is either a registered trademark or a trademark of ODVA.

Previous product

Лазерный Маркер Keyence MB3-H2D4-DVD

Next product

Лазерный Маркер Keyence MD-V9910WA

Лазерный Маркер Keyence MD-U1020C

3-Axis UV Laser Marker (Wide area)

Описание
Получить КП

Описание

Model	MD-U1020C
Type	Marking unit (controller + head) Wide area
Console	MC-P1 (sold separately)
2D code reader add-in	MD-XAD1/MD-XAD1A (sold separately)
Marking style	XYZ 3-Axis simultaneous scanning method
Marking laser	Type	YVO4 laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10) *1
Wavelength	355 nm
Output	3 W/40 kHz (output at focal point: 2.5 W)
Q-switch frequency	CW (continuous wave), 40 to 400 kHz
Guide laser / working distance pointer	Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part1040.10) *1
Marking area	330 x 330 x 42 mm
Standard working distance (±variation width)	300 mm (±21 mm)
Marking resolution	5 µm
Scan speed	Max. 8,000 mm/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font*2
Barcode	CODE39, ITF, 2of5, NW7 (Codabar) , JAN, CODE128, EAN, UPC-A, UPC-E, CODE93
2D code	QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
GS1 DataBar	GS1 DataBar, GS1 DataBar CC-A, GS1 DataBar Stacked, GS1 DataBar Stacked CC-A, GS1 DataBar Limited, GS1 DataBar Limited CC-A, GS1 DataBar Truncated, GS1 DataBar Truncated CC-A
Logo image	Custom character font and logo (DXF) data, BMP/JPEG/PNG/TIFF
Marking conditions	Marking style	Stationary marking, Moving marking (constant, encoder)
Character size (height ? width)	0.01 to 330 mm
Number of registered programs	2,000 max.
Number of blocks	256
Input / Output	Terminal block I/O, MIL connector I/O, contactor control I/O
Interface	RS-232C, USB2.0, Ethernet (100BASE-TX/10BASE-T) *3
Marking unit installation direction	All directions
Marking unit cable length	4.3±0.1 m
Cooling method	Forced air cooling
Rated voltage and power consumption	Single-phase 100 to 240 VAC±10 %, 50/60 Hz, 800 VA max.
Overvoltage category	II
Pollution degree	2
Enclosure rating	IP64 (marking head)
Environmental resistance	Operating ambient temperature	0 to + 40 °C
Operating ambient humidity	30 % to 85 % (no condensation)
Ambient temperature for storage	? 10 to + 60 °C (no freezing)
Ambient humidity for storage	30 % to 85 % (no condensation)
Weight	Controller: 23.5 kg Marking head: 18.0 kg Console: 2.0 kg
Compatible regulations	EU directive (EMC directive, low-voltage directive, RoHS directive), EN standard (EN 55011, EN 61010-1, EN 60825-1, EN 61000-6-2, EN 50581), CSA and UL standards (CAN/CSA C22.2 No. 61010-1, UL 61010-1), North America regulations (FCC Part 15B, ICES-001 Class A)
1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. 2 The only TrueType and OpenType fonts supported are those fonts whose “Font embeddability” property is set to “Installable” or “Editable.” This property can be viewed from the Properties dialogue boxes of the fonts shown on the [Fonts] screen in [Control Panel] . *3 There are two USB ports : a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder 3 (ActiveX) . The Ethernet port supports communication with Marking Builder 3 (ActiveX) , TCP/IP communication, EtherNet/IPTM and PROFINET. PROFINET is either a registered trademark or a trademark of PROFIBUS Nutzerorganisation e.V. EtherNet/IPTM is either a registered trademark or a trademark of ODVA.

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.

Категория: Лазерная Маркировка