Датчик измерения Keyence LK-035

Sensor Head, Wide Spot

Описание
Получить КП

Model	LK-035
Type	Sensor head High-precision Sensor head
Reference distance	30 mm
Measuring range	±5 mm
Light source	Type	Red semiconductor laser
Wavelength	670nm (Visible light), Class 2 laser product (JIS C6802)
Output	0.95 mW maximum
Spot diameter (at standard distance)	Approx. 30 x 850 µm
Linearity	±0.1% of F.S.
Repeatability	1 µm*1
Analogue output	Output voltage	±5 V (1 µm/mV)*2
Impedance	100 ?
Output current	4 to 20 mA (350 ? maximum)23
Alarm output	NPN: 100 mA max. (40 V max.) (N.C.), Residual voltage: 1 V max.
Sampling cycle	512 µs
Other functions	Auto-zero, analog output holding when an alarm occurs, gain switching, response switching, span and shift adjustment
Temperature characteristics	0.01% of F.S./°C
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
Maximum current consumption	400 mA max.
Environmental resistance	Enclosure rating	IP67
Ambient light	Incandescent or fl uorescent lamp: 10,000 lux max.
Ambient temperature	0 to +50 °C (No condensation)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material	Aluminium die-cast
Weight	Approx. 260 g (including cable)
1 Repeatability was obtained using KEYENCE’s analogue sensor controller (RD-50) with the number of averaging measurements set to 64. Note: The ripple of the analogue output may be 1 mV or more due to co mmon mode noise when observed with an oscilloscope or a high-speed A/D conversion board. 2 LK-010: When measurements cannot be performed, this is 12 V (21 mA). LK-035/030, LK-085/080, and LK-500: When measurements cannot be performed, this is 12 V (31.2 mA). *3 The ±5 V analog voltage output range (the ±

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-datchiki.ru с указанием требуемых позиций и реквизитами компании.