Model | LJ-G080 | |
Mounting | Diffuse reflective | |
Reference distance | 80 mm | |
Measuring range | Z-axis (Height) | ±23 mm |
X-axis (Width) | Near | 25 mm |
Reference distance | 32 mm | |
Far | 39 mm | |
Light source | Type | Red semiconductor laser |
Wavelength | 655nm (Visible light), Class 2 laser product (JIS C6802) | |
Output | 0.95 mW | |
Laser Class | Class II Laser Product (FDA (CDRH) 21CFR PART1040.10), Class 2 Laser Product (IEC 60825-1) | |
Spot shape (at reference distance) | Approx. 80 µm x 46 mm | |
Repeatability | Z-axis (Height) | 1 µm*1 |
X-axis (Width) | 10 µm*2 | |
Linearity Z-axis (Height) | ±0.1% of F.S.*3 | |
Sampling cycle (trigger interval) | 3.8 ms*4 | |
Temperature characteristics | 0.02% of F.S./°C | |
Environmental resistance | Enclosure rating | IP67 (IEC60529) |
Ambient light | Incandescent lamp or fluorescent lamp: 5,000 lux max.*5 | |
Ambient temperature | 0 to +50 °C | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Material | Aluminium | |
Weight | Approx. 350 g | |
*1 The value obtained after 64 times averaging at the reference distance. The target is KEYENCE standard object. The value is the average of the widths in the Height mode. *2 The value obtained after 64 times averaging at the reference distance. The target is o10 mm pin gauge. The value is the edge in the Position mode after 16 times of the Smoothing. *3 The target is KEYENCE standard object. The value is the average of the widths in the Height mode. *4 With initial setting, minimum measuring range, and single smoothing processing *5 The illumination on the receiver of the sensor head when targeting an illuminated white paper. |
Датчик измерения Keyence LJ-G080
Sensor Head
Описание
Получить КП
Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.
Категория: Датчики измерения