Датчик измерения Keyence LJ-V7001

Controller

Описание
Получить КП

Model	LJ-V7001
Number of connectable sensors	Max. 2 units
Display	Minimum displayable unit	0.1 µm, 0.00001 mm2, 0.01°
Maximum display range	±9999,99mm, ±9999,99mm2
Input terminal block	Laser remote interlock input	Non-voltage input*1
Input terminal block	Encoder input	NPN open-collector output, voltage output (5 V/12 V/24 V), and line-driver output all supported
Input terminal block	Trigger input	Non-voltage input*1
Timing 1,2 input
Auto-zero 1,2 input
Input terminal block	Reset 1, 2 input
Input terminal block	Start measurement/stop input
Start storage/stop input
Clear memory input
Laser OFF input
Programme switch input	Non-voltage input x 4 inputs*1
Output terminal block	Analogue voltage output	±10 V x 2 outputs, Output impedance: 100 ?
Output terminal block	OUT comparator output	NPN open collector output x 12 outputs*2 (Can freely assign 16 OUTs x 3 stage judgement results)
Strobe output	NPN open collector output*2
Disable trigger output
Memory FULL output
Ready output
Output terminal block	Error output	NPN open collector output (N.C.)*2
PC interface	Ethernet	1000BASE-T/100BASE-TX
USB	USB 2.0 high speed compliant (USB 1.1 Full-SPEED compatible)
RS232C	Measurement data output and control I/O (Can select a baud rate of up to 115,200 bits/s)
Rating	Power voltage	24 VDC ±10 %, including Ripple (P-P)
Current consumption	1.3 A or less when connected to 1 head 1.9 A or less when connected to 2 heads
Environmental resistance	Ambient temperature	0 to +50 °C
Relative humidity	20 to 85 % RH (No condensation)
Weight	Approx. 1,500 g
1 The rating for non-voltage input is up to 1 V for ON voltage and up to 0.6 mA for OFF current 2 The rating for NPN open-collector output is up to 50 mA (40 V or less), residual voltage of up to 1 V

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.