Датчик измерения Keyence IB-1050

Amplifier Unit, DIN Rail Type

Описание
Получить КП

Model	IB-1050
Type	DIN rail mount
Main unit/Expansion unit	Expansion unit
Head compatibility	Yes
Display	Display resolution	0.01 %, 0.1 %, 1 % (switchable)
Display range	–99.999 to 99.999, –99.99 to 99.99, –99.9 to 99.9, –99 to 99 (switchable)
Digital display method	Dual 7-segment display, Upper level: 5 red digits, Lower level: 5 green digits
Operation indicator	Judgment indicator: 2-colour (green/red) LED (HI, GO, LO), Bank indicator: Green LED x 4, Laser emission warning indicator: Green LED, Others: Green LED x 8, red LED x 3
Analogue output voltage	No
Analogue current output
Control Input	Bank switch input, zero shift input	Non-voltage input*1
Control input	Zero-shift input
Laser emission stop input
Timing input
Reset input
Adjust input
Control output	Judgment output (check output)	Open collector (NPN/PNP switchable, N.O./N.C. switchable)*2
Power supply	Power consumption	1,950 mW or less (at 30 V, 65 mA max.)*3
Rating	Power voltage	Supplied from main unit
Environmental resistance	Pollution degree	2
Ambient temperature	-10 to +50 °C (No condensation or freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z axis
Material	Case/Front panel: polycarbonate, keytop: polyacetal, cable: PVC
Weight	Approx. 140 g
1 The four external input wires are assigned with desired inputs. Rated no-voltage input: ON voltage 2 V or less, OFF current 0.05 mA or less Rated voltage input: Max. input rating 30 V or less, ON voltage 7.5 V or more, OFF current 0.05 mA or less 2 Rated NPN open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), 30 V or less, residual voltage 1 V or less Rated PNP open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), 30 V or less, residual voltage 2 V or less *3 The power consumption with slave units installed is the total of each amplifier unit’s power consumption. Example: When using one master unit (IB-1000) with two slave units (IB-1050) (1,950 mW x 1) + (1,950 mW x 2) = 5,850 mW