Model	IM-6700
Type	Controller
Image sensor	1″ 6.6 mega pixel monochrome CMOS
Display	10. 4″ LCD monitor (XGA: 1024 ? 768) External monitor connectable (clone output)
Receiver lens	Double telecentric lens
Image measurement	Field of view	Wide field: o100 ? L200 mm, High precision: 25 ? L125 mm
Minimum display unit	0.1 µm
Repeatability	W/o stage movement	Wide field: ±1 µm, High precision: ±0. 5 µm
With stage movement	Wide field: ±2 µm, High precision: ±1. 5 µm
Measurement accuracy (±2?)	W/o binding	Wide field: ±5 µm1, High precision: ±2 µm2
With binding	Wide field: ±(7 + 0. 02 L) µm3, High precision: ±(4 + 0. 02 L) µm4
External remote input	Non-voltage input (with and without contact)
External output	OK/NG/FAIL/MEAS.	Relay output/rated load: 24 VDC, 0. 5 A/ON resistance
Interface	LAN	RJ-45 (10BASE-T/100BASE-TX/1000BASE-T)
USB 2.0 series A	6 ports (front: 2, rear: 4)
Record	Hard disk drive	250 GB
Illumination system	Transparent	Telecentric transparent illumination
Ring	Four division, multi-angle illumination (electric) Slit ring (directivity) illumination (electric)
X stage	Moving range	100 mm (electric)
Z stage	30 mm (electric)
Withstand load	2 kg
Measurement points	99 points max. (99 ? 9 points possible when the function for consolidating measurement settings is used)
Pattern search (profi le tracking function)	XY? (with 360° rotary position compensation)
Pattern registration	1000 patterns or more*5
Measurement time	2 seconds*6
Basic measurement function	Distance measurement	8 types (point-point/line-point/line-line/circle-point/circle-line/circle-circle/circle/arc)
Angle measurement	Provided
Calculation
Virtual line function	Point	Middle point/intersection
Conjunction edge	Line conjunction/circular conjunction
Line	6 types (midline/perpendicular line/parallel lines/tangent line/line passing through a point/approximate line)
Circle	Middle circle/approximate circle/auxiliary circle/inscribed and circumscribed circle
Application tool	Pitch measurement	Line/circumference
Pitch angle
Width measurement	Edge width
Thickness measurement	Thickness measurement/gap measurement between inner and outer diameters
Special tool	Rounded corner/curved surface/oval/reticle/point position/perimeter/area/screw/automatic measurement
GD&T	Shape tolerance	Straightness/circularity/profile
Orientation tolerance	Squareness/parallelism
Position tolerance	Point position/concentricity
Element tool	Point	Point (on a line or arc)/maximum and minimum (rectangle, circle, arc)
Line	Line/centre line/peak line
Circle	Circle/arc/peak circle/peak arc
Profi le extraction	Provided
Special tool	Automatic generation/gauge line
Manual measurement	Provided
Coordinate system confi guration
Batch confi guration of tolerance
Element list editing
Measurement setting data binding function
DXF export function
Automatic measurement function
Q-DAS data save function
Measurement settings support functions	Provided*7
Power supply	Power voltage	100 to 240 VAC 50/60 Hz
Power consumption	310 VA max.
Environmental resistance	Ambient temperature	+10 to +35 °C
Relative humidity	20 to 80 % RH (No condensation)
Weight	Approx. 8 kg
1 In the range of o80 mm from the centre of the stage within the operating ambient temperature range of +23°C ±1.0°C at the focused focal point position 2 In the range of o20 mm from the centre of the stage within the operating ambient temperature range of +23°C ±1.0°C at the focused focal point position 3 In the range of o80 ? 180 mm from the centre of the stage, within the operating ambient temperature range of +23°C ±1.0°C at the focused focal point position, and with a load weighing 1 kg or less on the stage (L = amount of stage movement in mm units) 4 In the range of o20 ? 120 mm from the centre of the stage, within the operating ambient temperature range of +23°C ±1.0°C at the focused focal point position, and with a load weighing 1 kg or less on the stage (L = amount of stage movement in mm units) 5 Depending on the measurement setting data and number of data pieces being stored 6 Without pattern search, applied measurement, and stage movement *7 Optimum lighting guide, optimum lighting search, automatic edge extraction parameter adjustment function, and multiple edge extraction function

Previous product

Измерительная система Keyence IM-6600F

Next product

Измерительная система Keyence IM-H1EE

Измерительная система Keyence IM-6700

Controller

Описание
Получить КП

Описание

Model	IM-6700
Type	Controller
Image sensor	1″ 6.6 mega pixel monochrome CMOS
Display	10. 4″ LCD monitor (XGA: 1024 ? 768) External monitor connectable (clone output)
Receiver lens	Double telecentric lens
Image measurement	Field of view	Wide field: o100 ? L200 mm, High precision: 25 ? L125 mm
Minimum display unit	0.1 µm
Repeatability	W/o stage movement	Wide field: ±1 µm, High precision: ±0. 5 µm
With stage movement	Wide field: ±2 µm, High precision: ±1. 5 µm
Measurement accuracy (±2?)	W/o binding	Wide field: ±5 µm1, High precision: ±2 µm2
With binding	Wide field: ±(7 + 0. 02 L) µm3, High precision: ±(4 + 0. 02 L) µm4
External remote input	Non-voltage input (with and without contact)
External output	OK/NG/FAIL/MEAS.	Relay output/rated load: 24 VDC, 0. 5 A/ON resistance
Interface	LAN	RJ-45 (10BASE-T/100BASE-TX/1000BASE-T)
USB 2.0 series A	6 ports (front: 2, rear: 4)
Record	Hard disk drive	250 GB
Illumination system	Transparent	Telecentric transparent illumination
Ring	Four division, multi-angle illumination (electric) Slit ring (directivity) illumination (electric)
X stage	Moving range	100 mm (electric)
Z stage	30 mm (electric)
Withstand load	2 kg
Measurement points	99 points max. (99 ? 9 points possible when the function for consolidating measurement settings is used)
Pattern search (profi le tracking function)	XY? (with 360° rotary position compensation)
Pattern registration	1000 patterns or more*5
Measurement time	2 seconds*6
Basic measurement function	Distance measurement	8 types (point-point/line-point/line-line/circle-point/circle-line/circle-circle/circle/arc)
Angle measurement	Provided
Calculation
Virtual line function	Point	Middle point/intersection
Conjunction edge	Line conjunction/circular conjunction
Line	6 types (midline/perpendicular line/parallel lines/tangent line/line passing through a point/approximate line)
Circle	Middle circle/approximate circle/auxiliary circle/inscribed and circumscribed circle
Application tool	Pitch measurement	Line/circumference
Pitch angle
Width measurement	Edge width
Thickness measurement	Thickness measurement/gap measurement between inner and outer diameters
Special tool	Rounded corner/curved surface/oval/reticle/point position/perimeter/area/screw/automatic measurement
GD&T	Shape tolerance	Straightness/circularity/profile
Orientation tolerance	Squareness/parallelism
Position tolerance	Point position/concentricity
Element tool	Point	Point (on a line or arc)/maximum and minimum (rectangle, circle, arc)
Line	Line/centre line/peak line
Circle	Circle/arc/peak circle/peak arc
Profi le extraction	Provided
Special tool	Automatic generation/gauge line
Manual measurement	Provided
Coordinate system confi guration
Batch confi guration of tolerance
Element list editing
Measurement setting data binding function
DXF export function
Automatic measurement function
Q-DAS data save function
Measurement settings support functions	Provided*7
Power supply	Power voltage	100 to 240 VAC 50/60 Hz
Power consumption	310 VA max.
Environmental resistance	Ambient temperature	+10 to +35 °C
Relative humidity	20 to 80 % RH (No condensation)
Weight	Approx. 8 kg
1 In the range of o80 mm from the centre of the stage within the operating ambient temperature range of +23°C ±1.0°C at the focused focal point position 2 In the range of o20 mm from the centre of the stage within the operating ambient temperature range of +23°C ±1.0°C at the focused focal point position 3 In the range of o80 ? 180 mm from the centre of the stage, within the operating ambient temperature range of +23°C ±1.0°C at the focused focal point position, and with a load weighing 1 kg or less on the stage (L = amount of stage movement in mm units) 4 In the range of o20 ? 120 mm from the centre of the stage, within the operating ambient temperature range of +23°C ±1.0°C at the focused focal point position, and with a load weighing 1 kg or less on the stage (L = amount of stage movement in mm units) 5 Depending on the measurement setting data and number of data pieces being stored 6 Without pattern search, applied measurement, and stage movement *7 Optimum lighting guide, optimum lighting search, automatic edge extraction parameter adjustment function, and multiple edge extraction function

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-datchiki.ru с указанием требуемых позиций и реквизитами компании.

Категория: Измерительные системы