Датчик процесса Keyence AP-33P

Main Unit, Positive-pressure Type, 1 Mpa, PNP

Описание
Получить КП

Model	AP-33P
Type	Positive-pressure, PNP
Rated pressure	0 to 10.00 bar (0 to 1.000 MPa)
Fluid type	Air or non-corrosive gases
Type of pressure	Gauge pressure
Display	3 1/2-digit, 2-colour, 7-segment LED (Character height: 11 mm)
Display resolution	0.01 bar, 0.2 Psi, 0.001 Mpa, 0.01 kgf/cm2
Detectable pressure range	-15 to +110 % of F.S.
Display temperature characteristic	±1 % max. (of F.S.) of detecting pressure at 25 °C (0 to 50 °C)
Temperature fluctuation for analogue output	±2 % max. (of F.S.) of detecting pressure at 25 °C (0 to 50 °C)
Response time (Chattering prevention function)	2.5/5/100/500 ms (selectable)
I/O	Analogue output	1 to 5 V (Load impedance: 47 k? min.)
Control output	2 PNP open-collector: 100 mA max. (30 V max.), Residual voltage: 1 V max. 2-output (N.O./N.C.selectable)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Current consumption	50 mA (at 24 V) or less, 90 mA (at 12 V) or less
Environmental resistance	Pressure resistance	1.5 MPa (15 bar)
Ambient temperature	0 to +50 °C (No freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material	Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone, Pressure port: Die-cast zinc, Cable: Oil-proof cabtyre cable
Weight	Approx. 120 g (including 2 m cable)

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.