Датчик процесса Keyence AP-V41WP

Amplifier Unit, Main Unit, PNP

Описание
Получить КП

Model	AP-V41WP
Type	Amplifier Unit, PNP
Applicable sensor head	AP-41M, AP-41, AP-43, AP-44, AP-48
Display	4 1/2-digit, 2-colour, 7-segment LED (Character height: 4.5 mm), AI indicator (green), Display cycle: 10 times/s
Operation indicator	Red LED x 2 (corresponding to control output 1 and 2)
Power consumption	Normal	12 V: 840 mW (70 mA) max., 24 V: 1,200 mW (50 mA) max.
Display resolution	AP-41M/41: Standard mode 0.1 kPa, High-resolution/Focus mode 0.01 kPa AP-43: Standard mode 0.001 MPa, High-resolution/Focus mode 0.1 kPa AP-44/48: Standard mode 0.1 kPa, High-resolution/Focus mode 0.02 kPa
Display temperature characteristic	±1 % of F.S. or less
Hysteresis	Standard mode: 0.5 % of F.S., high-resolution mode: 0.1 % of F.S., hysteresis variable mode (F-2): variable
Response time (Chattering prevention function)	1/2.5/5/100/500 ms (selectable; 1 ms is used when high-speed mode is selected)
I/O	Analogue output	1 to 5 V with load impedance of 1 k? max. (or zero-shift input selectable)*1
Zero-shift input	Input time: 2 ms or more (or analog output selectable)
Control output	Maximum PNP open-collector output: 100 mA (30 V or less), residual voltage: 1 V or less, 2 outputs (N.O./N.C. switchable)*2
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Power consumption	Eco mode	12 V: 600 mW (50 mA) max., 24 V: 960 mW (40 mA) max.
Environmental resistance	Ambient temperature	0 to +50 °C (No freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material	Polycarbonate
Accessories	Mounting bracket, head connection connector
Weight	Approx. 80 g (with 2 m cable)
1 Only the AP-V41AW (P) (Master) and AP-C40W (P) apply. 2 20 mA or less when extended

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.