Датчик процесса Keyence AP-V41AWP

Amplifier Unit, Main Unit, PNP

Описание
Получить КП

Model	AP-V41AWP
Type	Amplifier Unit, PNP
Applicable sensor head	AP-41M, AP-41, AP-43, AP-44, AP-48
Set and display range	-15 to +110 % of F.S.*1
Display	4 1/2-digit, 2-colour, 7-segment LED (Character height: 4.5 mm), AI indicator (green), Display cycle: 10 times/s
Repeatability	±0.2 % of F.S.
Operation indicator	Red LED x 2 (corresponding to control output 1 and 2)
Display resolution	AP-41M/41: Standard mode 0.1 kPa, High-resolution/Focus mode 0.01 kPa AP-43: Standard mode 0.001 MPa, High-resolution/Focus mode 0.1 kPa AP-44/48: Standard mode 0.1 kPa, High-resolution/Focus mode 0.02 kPa
Power consumption	Normal	12 V: 720 mW (60 mA) max., 24 V: 960 mW (40 mA) max.
Display temperature characteristic	±1 % of F.S. max.
Hysteresis	Variable (Standard: 0.5 % of FS; high-resolution/focus mode: 0.1 % of F.S.)
Response time (Chattering prevention function)	1 (in high-speed mode only), 2.5, 5, 100, or 500 ms (selectable)
I/O	Analogue output	1 to 5 V with load impedance of 1 kW max. (or zero-shift input selectable)
Zero-shift input	Input time: 2 ms or more (or analog output selectable)
Control output	PNP open collector 100 mA max. (at 30 V or below) with max., residual voltage of 1 V, 2 outputs (NO or NC selectable)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Power consumption	Eco mode	12 V: 480 mW (40 mA) max., 24 V: 720 mW (30 mA) max.
Environmental resistance	Ambient temperature	0 to +50 °C (No freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material	Polycarbonate
Accessories	Mounting bracket, Head connector
Weight	Approx. 80 g (with 2-m cable)
*1 The focus range applies while in focus mode only.

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.