Датчик процесса Keyence AP-V42

Amplifier Unit, Expansion Unit, NPN

Описание
Получить КП

Model	AP-V42
Type	Amplifier Unit, NPN
Set and display range	-15 to +110 % of F.S.
Display	4 1/2-digit, 2-colour, 7-segment LED (Character height: 4.5 mm), AI indicator (green), Display cycle: 10 times/s
Repeatability	±0.2 % of F.S. or less
Operation indicator	Red LED x 2 (corresponding to control output 1 and 2)
Power consumption	Normal	12 V: 660 mW (55 mA) max., 24 V: 900 mW (37 mA) max.
Display resolution	AP-41M/41: Standard mode 0.1 kPa, High-resolution/Focus mode 0.01 kPa AP-43: Standard mode 0.001 MPa, High-resolution/Focus mode 0.1 kPa AP-44/48: Standard mode 0.1 kPa, High-resolution/Focus mode 0.02 kPa
Display temperature characteristic	±1 % of F.S. or less
Hysteresis	Variable (0.5 % of F.S. in standard mode)
Response time (Chattering prevention function)	1/2.5/5/100/500 ms (selectable)*1
I/O	Zero-shift input	No-voltage input (with contacts, without contacts), input time: 2 ms or more (switchable with analog output on the V41)
Control output	Maximum NPN open-collector output: 100 mA (40 V or less),*2 residual voltage: 1 V or less, 2 outputs (N.O./N.C. switchable)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Power consumption	Eco mode	12 V: 480 mW (40 mA) max., 24 V: 720 mW (30 mA) max.
Environmental resistance	Ambient temperature	0 to +50 °C (No freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material	Polycarbonate
Accessories	End Unit,Head Connector, and Expansion Seal
Weight	Approx. 80 g (with 2 m cable)
1 100 ms and 500 ms are selectable when using the AP-47. 2 20 mA or less when extended

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.