Датчик процесса Keyence GP-M250

Main Unit, Positive-pressure Type, 25 MPa

Описание
Получить КП

Model	GP-M250
Rated pressure	0 to +25 MPa (0 to +250 bar)
Possible display range	-2.50 to +27.50 MPa (-25.0 to +275.0 bar)
Zero-cut pressure value	±0.5% of F.S.
Burst pressure	100 MPa (1000 bar)
Display resolution	0.01 MPa (0.1 bar)
Fluid type	Liquid that will not corrode the liquid contact part
Type of pressure	Gage pressure
Precision	±1.0% of F.S. or less*1
Repeatability	±0.3% of F.S. or less*2
Temperature characteristics	±0.6% of F.S./10°C
Connection diameter	G3/4 (Changes to the R male 1/8, R male 1/4, R male 3/8, G female 1/4, NPT male 1/8, and NPT male 1/4 option adapters are available.)
Box rotation angle	Maximum 330°
Medium temperature	-20 to +100°C (no freezing/condensation)*3
Power supply voltage	10-30 VDC, Ripple (P-P): 10% max, Class 2 or LPS
Current consumption	50 mA or less (when 24 V: 32 mA or less, when 12 V: 48 mA or less. Not including load)*4
Display method	4 column, digital LED, red/Vertical inversion display possible
Operation display light	Operation indicator (output 1) (orange), Operation indicator (output 2) (orange)
Hysteresis	During hysteresis mode: variable (Difference between switch-on point and switch-off point is hysteresis) During window mode: fixed (0.5% of F.S.)
Response	Control output	Selectable from 3 to 5000 ms
Analogue output	As above + 2 ms (90% response)
Output	Output 1 control output	NPN/PNP open collector (Selectable), Max. 250 mA (30 V max) Main unit residual voltage 1 V max, N.O./N.C. selectable
Output 2 replacement type	Control output
Analogue output	4-20 mA, maximum load resistance 500 ? (When the electric voltage is more than 20 V)*5
Environmental resistance	Enclosure rating	IP67
Pressure resistance	50 MPa (500 bar)
Ambient temperature	-20 to +80 °C (No freezing and no condensation)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	IEC60068-2-6 20 G (10 to 2000 Hz, 2 hours each in the X, Y, and Z axes)
Shock resistance	IEC60068-2-27 50G (11 ms, 3 times for each of X, Y and Z direction)
Material properties	Port/diaphragm	Pressure port: SUSXM7, Diaphragm pressure port: Al2O3 (Alumina), O ring: FKM
Other parts	Housing metal portion: SUS304, SUS303, Housing plastic portion: PPSU
Applicable cable	M12 connector 4 pin
Weight	Approx. 150 g
1 This is the value when considering linearity + hysterisis + repeatability in a stable environment of 23°C. 2 The repeatability, based on consistent conditions, is the difference in the detection points at the time of fluctuations in the repetition. 3 When the temperature of the piping exceeds 80°C, do not connect the cable. 4 Consumption current including output is 0.6 A and under. *5 The maximum load resistance R will be the values below in response to the electric voltage E. When 10-23V: R = {38 x (E-10) + 128} ? When 23-30V: R = 622 ?