Датчик Keyence FS-M2

Fibre Amplifier, Cable Type, Expansion Unit, NPN

Описание
Получить КП

Model	FS-M2
Type	1-line expansion unit
Output	NPN
Light source	Red LED
Sensitivity adjustment/Mode selection	8-turn trimmer (with indicator), FINE/TURBO (switch-selectable)
Response time	250 µs (FINE) /500 µs (TURBO)
Operation mode	LIGHT-ON/DARK-ON (switch-selectable)
Indicator lamp	Output: Red LED Stable operation: Green LED
Timer function	ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable)
Input	?
Control output	NPN: 100 mA (40 V) max. Residual voltage: 1 V max.*1
Stability output	NPN open-collector 50 mA max. (40 VDC max.), Residual voltage: 1 V max.*2
Protection circuit	Reversed polarity protection, Overcurrent protection, Surge absorber
Unit expansion	Up to 16 expansion units can be connected (a total of 17 units)*3
Mutual interference suppression	FINE : 4, TURBO/SUPER: 8
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less*4
Current consumption	35 mA or less
Environmental resistance	Ambient light	Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.
Ambient temperature	-10 to +55 °C (No freezing)*5
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	500 m/s2, 3 times in each of the X, Y, and Z directions
Case material	Polycarbonate
Weight	Approx. 40 g
1 La salida de alarma de interrupcion de conexion no esta disponible en ES-M2 (P). 2 Only the FS-T1 and FS-M1 can provide stability outputs. 3 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 3 to 10 Units: -10 to +50°C (14 to 122°F), 11 to 16 Units: -10 to +45°C (14 to 113°F) 4 Power to the FS-T2/T0/M2/M0 is supplied through the FS-T1/M1/V1/V11/R0, PS-T1, LV-21A/11A or CZ-V1. *5 When extended, the ambient usage temperature varies according to the following conditions. Be sure to mount units on a DIN rail (attached to a metal plate) and ensure that the output current is 20 mA or less. When extended

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.