Датчик Keyence FS-T1G

Fibre Amplifier, Cable Type, Main Unit, NPN

Описание
Получить КП

Model	FS-T1G
Light source	Green LED
Response time	250 µs
Operation mode	LIGHT-ON/DARK-ON (switch-selectable)
Indicator lamp	Output indicator: Red LED, Stable operation indicator: Green LED, Calibration indicator: Orange LED
Timer function	ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable)
External calibration input signal	Non-voltage input (contact, solid state)
Input
Control output	NPN: 100 mA (40 V) max. Residual voltage: 1 V max.*1
Stability output	NPN open-collector: 50 mA max. (40 VDC max.), Residual voltage:1 V max.
Protection circuit	Reversed polarity protection, Overcurrent protection, Surge absorber
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Current consumption	35 mA or less
Environmental resistance	Ambient light	Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.
Ambient temperature	-10 to +55 °C (No freezing)*2
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	500 m/s2, 3 times in each of the X, Y, and Z directions
Case material	Polycarbonate
Accessories	Fittings
Weight	Approx. 75 g
1 La salida de alarma de interrupcion de conexion no esta disponible en ES-M2 (P). 2 When extended, the ambient usage temperature varies according to the following conditions. Be sure to mount units on a DIN rail (attached to a metal plate) and ensure that the output current is 20 mA or less. When extended

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.