Датчик Keyence FS-V12P

Fibre Amplifier, Cable Type, Expansion Unit, PNP

Описание
Получить КП

Model	FS-V12P
Type	1-line expansion unit
Output	PNP
Light source	Red LED
Response time	250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO)
Operation mode	LIGHT-ON/DARK-ON (switch-selectable)
Indicator lamp	Display indicator: Red LED Digital LED monitor: Seven segments, four digits, red LED Bar LED monitor: One orange LED and six green LEDs
Timer function	ON-delay: 40 ms /OFF-delay: 10 ms /Timer OFF (switch-selectable)
Control output	PNP open-collector 100 mA max. (24 VDC max.), Residual voltage: 1 V max.
Protection circuit	Reversed polarity protection, over-current protection, surge absorber
Unit expansion	Up to 16 expansion units can be connected (a total of 17 units).*1
Mutual interference suppression	FINE : 4, TURBO/SUPER: 8
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less*2
Current consumption	50 mA or less
Environmental resistance	Ambient light	Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.
Ambient temperature	-10 to +55 °C (No freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	500 m/s2, 3 times in each of the X, Y, and Z directions
Case material	Polycarbonate
Weight	Approx. 45 g
1 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 3 to 10 Units: -10 to 50°C, 11 to 16 Units: -10 to 45°C 2 Neither the FS-V12 nor the FS-V10 can be used as a standalone unit.

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-datchiki.ru с указанием требуемых позиций и реквизитами компании.