Датчик Keyence IX-360

Sensor Head 360 mm

Описание
Получить КП

Model	IX-360
Reference distance	360 mm
Measuring distance	280 to 440 mm
Detection area	Scan mode	Measuring distance of 280 mm: 66.0 ? 49.5 mm (min.) Measuring distance of 360 mm: 84.0 ? 63.0 mm (min.) Measuring distance of 440 mm: 102.0 ? 76.5 mm (X direction) ? (Y direction) *1
Line mode	Measuring distance of 280 mm: 66.0 mm (min.) Measuring distance of 360 mm: 84.0 mm (min.) Measuring distance of 440 mm: 102.0 mm (X direction) *1
Laser Light source	Light source	660 nm (visible light) wavelength red semiconductor laser
Laser class	Class II laser product (FDA [CDRH] part 1040.10), Class 2 laser product (IEC 60825-1: 2014)
Output	0.95 mW (FDA (CDRH) Part 1040.10), 1.6 mW (IEC 60825-1: 2014)
Minimum detectable object size	Scan mode	o1.8 mm*2
Line mode	1.8 mm ? 1.8 mm*2
Repeatability	150 µm*3
Estimated detection	(Estimated detection: When measuring the height between two points, the minimum step difference is as follows. IX-055: 100 µm / IX-080: 200 µm / IX-150: 500 µm / IX-360: 1000 µm) *3
Sampling cycle	Scan mode	120 ms (min.) (typical)
Line mode	6 ms / 11 ms (selectable)
Image receiving element	Monochrome CMOS image sensor
Image capture lighting	Light source	Red LED
Lighting method	Pulse lighting
Temperature characteristics	0.08% of F.S./°C*4
Environmental resistance	Enclosure rating	IP67
Ambient light	Incandescent lamp, 5000 lux or less*5
Operating ambient temperature	0 to +45°C (No freezing) *6
Operating ambient humidity	35 to 85% RH (No condensation)
Vibration resistance	10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions
Shock resistance	500 m/s2, 3 times in each of the 3 directions
Material	Main unit case: Zinc die-casting / Front cover: Glass, acrylic (hard coat) / Operation indicator cover: TPU / Connector ring: PBT / Connector Zinc die-casting
Weight	Approx. 190 g
1 X: Long-side direction of laser, Y: Short-side direction of laser 2 With a correctly attached reference distance. When measuring using the height tool, measurement point min., and no position adjustment in scan mode. When measuring using the height tool, tool window size min., and no position adjustment in line mode. 3 When measuring at the centre of the field of view in scan mode using the “Max.” measurement point of a KEYENCE reference target (white diffuser) at the reference distance. 4 At the reference distance from the target. The F.S. for each model are as follows. IX-055: ±10 mm, IX-080: ±18 mm, IX-150: ±50 mm, IX-360: ±80 mm 5 Using the default settings with a laser light source as the target. 6 With metal mounting.