| Model | LR-TB5000CL | |
| Type | Cable with connector M12 | |
| Detectable distance | 60 to 5000 mm*1 | |
| Spot diameter | Variable (use a spot diameter of 40 mm or less) |
|
| Response time | 2 ms/20 ms/50 ms/200 ms/2000 ms selectable |
|
| Light source | Type | Red laser (660 nm) |
| Laser class | Class 1 laser product (IEC60825-1,FDA (CDRH) Part1040.10*2) |
|
| Mutual interference prevention function | 4 units (when using the interference prevention function) | |
| Timer | OFF/OFF delay/ON delay/One-shot | |
| Power voltage | 20 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS | |
| Current consumption | 50 mA or less (without load)*3 | |
| I/O | Control output | NPN open collector/PNP open collector selectable 30 VDC or less, 50 mA or less, residual voltage: 2 V or less, N.O./N.C. selectable *4*5 |
| External input | Switchable between transmission OFF, teaching, and reference surface update Short-circuit current: 1 mA or less for both NPN and PNP For the applied voltage, see the wiring diagrams (pages 2 and 3 in the instruction manual). For the input times, see the time charts (page 4 in the instruction manual).*3 |
|
| Analogue output | Current output/Voltage output selectable Current output: 4 to 20 mA with a max. load resistance of 500 ? Voltage output: 0 to 10 V with an external load resistance of 5 k? or more *4*5 |
|
| Protection circuit | Protection against reverse power connection, power supply surges, output overcurrent, reverse output connection, and output surge | |
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) |
| Ambient light | Incandescent lamp/Sunlight: 10,0000 lux or less | |
| Ambient temperature | -20 to +55 °C (No freezing) | |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Shock resistance | 1,000 m/s2, 6 times in each of the X, Y, and Z directions | |
| Material | Case: Zinc die cast (Nickel chrome plating), Indicator cover and buttons: PES, Lens cover and display: PMMA (scratch-resistant coating specifications), Cable bushing: PBT, Cable: PVC, M12 connector: TPE, PBT, Nickel-plated brass |
|
| Accompanying items | Instruction manual | |
| Weight | Approx. 160 g | |
| *1 The range for displayable distance is from 50 to 5200. *2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. *3 150 mA or less (with load) *4 You can select the I/O from the following combinations. Control output ? 2, control output + external input Control output + analogue output (LR-TB5000/TB5000C/TB5000CL only), External input + analogue output (LR-TB5000/TB5000C/TB5000CL only) (For details on the setting method, see the instruction manual.) *5 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. You can download a setup file from the KEYENCE website (http://www.keyence.com). If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office. |
Датчик Keyence LR-TB5000CL
Detection distance 5 m, Cable with connector M12, Laser Class 1
Описание
Похожие товары
Закрыть
Датчик Keyence FS2-65P
Fibre Amplifier, Cable Type, PNP
Закрыть
Датчик Keyence FS-15
Fibre Amplifier NPN
Закрыть
Датчик Keyence FS2-62
Fibre Amplifier, Cable Type, NPN
Закрыть
Датчик Keyence FS-15G
Amplifier Unit
Закрыть
Датчик Keyence OP-236 (OP-0236)
FU Free-cut Connector (f2.2)
Закрыть
Датчик Keyence FS-17P
Fibre Amplifier PNP
Закрыть
Датчик Keyence FS-14
Fibre Amplifier NPN
Закрыть