Датчик Keyence LV-51MP

Amplifier Unit, Main Unit, PNP

Описание
Получить КП

Model	LV-51MP
Type	PNP output
Main unit/Expansion unit	Main unit
Control output	PNP open-collector x 2 channels, 30 VDC max., 100 mA, max. residual voltage (1.0 V max.)
Response speed	FINE : 80 µs , TURBO : 500 µs , SUPER : 4 ms
Monitor output	1 to 4 V for 1 to 4 V voltage output and FINE display 0 – 3000, load resistance 20 k? min.
Number of interference preventive units	FINE : No device (0) , TURBO : 2 units , SUPER : 4 units*1
Detection mode	Light intensity distinction / edge detection
Protection circuit	Reversed polarity protection, over-current protection, surge absorber
Unit expansion	Up to 7 additional expansion units can be installed (8 units including the main unit),
Rating	Power voltage	12 to 24 VDC, Ripple (P-P) 10 % or less
Power consumption	1.5 W max. (125 mA max. for 12 V, 62.5 mA max. for 24 V)
Environmental resistance	Ambient temperature	-10 to +55 °C (No freezing)*2
Relative humidity	35 to 85 % RH (No condensation)
Material	Main unit	Polycarbonate
Case
Weight	Approx. 120 g
1 To connect several units they must be mounted on a METAL DIN rail. Ensure that the output current is 20 mA max. With several units connected, the allowable ambient temperature range varies as follows : When 2 to 5 expansion units are additionally installed : -10 to +50?C (14 to 122?F).When 6 or 7 expansion units are additionally installed : -10 to +45?C (14 to 113?F). 2 When extended, the ambient usage temperature varies according to the following conditions. Be sure to mount units on a DIN rail (attached to a metal plate) and ensure that the output current is 20 mA or less. When extended