Датчик Keyence PS-N11P

Amplifier Unit, Cable Type, Main Unit, PNP

Описание
Получить КП

Model	PS-N11P
Type	Cable
Output	PNP
Main unit/Expansion unit	Main unit
I/O	Control outputs	1 output
External input	1 input
Response time	500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)
Output selection	LIGHT-ON/DARK-ON (switch-selectable)
Timer function	Timer OFF/OFF-delay timer/ON-delay timer/One-shot timer, Timer duration selectable: 1 ms to 9999 ms, Maximum error against the setting value: ±10% max.
Control output	PNP open collector 30 V, (without expansion) 100 mA max., (with expansion) 20 mA max, residual voltage 1.2 V max. (when the output current is 10 mA or less)/2.2 V max. (when the output current is 10 to 100 mA)
External input	Input time 2 ms (ON)/20 ms (OFF) or more*1
Unit expansion	Up to 17 main units can be connected
Protection circuit	Reverse polarity protection, Over-current protection, Surge absorber
Number of interference prevention units	4 for TURBO/SUPER/ULTRA/MEGA (When set to DOUBLE, the number of interference-prevention units will be doubled)
Case size	H 32.6 mm ? W 9.8 mm ? L 78.7 mm
Rating	Power voltage	24 VDC (operating voltage 10 to 30 VDC (with ripple)), Ripple (P-P) 10 % or less, Class 2 or LPS
Power consumption	Normal: 860 mW or less (at 30 V. 30 mA max. at 24 V, 35 mA max. at 12 V) Eco on mode (ALL): 750 mW or less (at 30 V. 26 mA max. at 24 V, 28 mA max. at 12 V) Eco Full mode: 540 mW or less (at 30 V. 19 mA max. at 24 V, 21 mA max. at 12 V)
Environmental resistance	Ambient temperature	-20 to +55 °C (No freezing)*2
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	500 m/s2, 3 times in each of the X, Y, and Z directions
Material	Case	Main unit and cover material: Polycarbonate
Cable	PVC
Weight	Approx. 75 g
1 Input time is 25 ms (ON)/25 ms (OFF) when the external calibration time is selected. 2 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less for a uni t . One or two more units connected: -20 to +55 °C ; 3 to 10 more units connected: -20 to +50 °C; 11 to 16 more units connected: -20 to +45 °C .

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.