| Model | GT2-E3N | |
| Output | NPN output | |
| Mounting type | Installed into GT2-100N/100P (up to 3 boards) | |
| Main unit/Expansion unit | – | |
| Power supply voltage | Supplied from the GT2-100N/100P | |
| Power consumption | Normal | Eco half: 4,200 mW or less (140.0 mA or less at 30 V), Eco all: 4,000 mW or less (133.3 mA or less at 30 V)*1 |
| Power saving (Eco) | 4,000 mW or less (133.3 mA or less at 30 V) | |
| Display range | – | |
| Display resolution | ||
| Control input | Timing/preset/ reset/bank input |
No-voltage input |
| Control output | HH/HI/GO/LO/LL | NPN open collector, 40 V 50 mA or less*2, residual voltage 1 V or less |
| Response time | hsp (3) /5/10/100/500/1,000 ms | |
| Environmental resistance | Ambient temperature | -10 to +50 °C |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Materials | Main body case/front cover: polycarbonate (PC), Key top: polyacetal (POM), Front sheet: polyethylene terephthalate (PET) | |
| Power supply / I/O cable | I/O: 30-pin connector (MIL standard) | |
| Weight | Approx. 80 g | |
| *1 When the maximum number of sensor heads is connected, and all devices are set to power saving settings *2 When 2 or more sensor heads are connected, 20 mA or less. |
Датчик Keyence GT2-E3N
Extension Board for GT2-100N
Описание
Получить КП
Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-datchiki.ru с указанием требуемых позиций и реквизитами компании.
Похожие товары
Закрыть
Датчик Keyence FS-15G
Amplifier Unit
Закрыть
Датчик Keyence F-20
FS-L side-view attachment
Закрыть
Датчик Keyence FS-L41
Reflective Sensor Head
Закрыть
Датчик Keyence OP-236 (OP-0236)
FU Free-cut Connector (f2.2)
Закрыть
Закрыть
Датчик Keyence FS-L51
Transmissive Sensor Head
Закрыть
Датчик Keyence FS2-65
Fibre Amplifier, Cable Type, NPN
Закрыть
Датчик Keyence FS-16G
Amplifier Unit