Датчик безопасности Keyence SL-C08H

Main Unit, General-purpose Type, 8 Optical Axes

Описание
Получить КП

Model	SL-C08H
Effective aperture angle	Max. ±2.5 ° (when operating distance is at least 3 m)
Response time	15 ms *1
Light source	Infrared LED (850 nm)
Operation mode	Turned on when light is being applied to all optical axes (excluding when the blanking function is used)
Detection capability	o25 mm (when the blanking function is not used)
No. of beam axes	8
Detection zone	140 mm
Protection area	185 mm
Detectingdistance	0.3 to 9 m
Operating distance/Beam width
Beam axis interval	20 mm
Lens diameter	o5mm
OSSD output	Output type	2 outputs each for PNP and NPN, Can be switched using the connection connector cable
Max. load current	300 mA *2
OFF-state voltage	2.5 V (with a cable length of 7 m)
Leakage current	100 µA maximum*3
Max. capacitive load	2.2 µF (with a load resistance of 100 ?)
Load wiring resistance	2.5 ? maximum*4
Approved standards	EMC	EMS	UL61496-1
EMI	FCC Part15 Class A
Safety	UL61496-1 (type 4 ESPE), UL61496-2 (type 4 AOPD),UL508
Current consumption	Transmitter	55 mA
Receiver	67 mA
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
Environmental resistance	Enclosure rating	IP65 (IEC60529)
Ambient light	Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less
Operating ambient temperature	-10 to +55 °C (No freezing)
Storage temperature	-10 to +60 °C (No condensation
Operating relative humidity	35 to 85 % RH (No condensation)
Storage relative humidity	35 to 95 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions
Shock resistance	100 m/s2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case	Aluminum
Upper case/lower case	Zinc die-cast
Front cover	Polycarbonate
Weight	Transmitter	Approx 165 g
Receiver	Approx 180 g
1 OFF>ON return time is 125 ms. 2 Note the derating illustrated in the graph to the right when using PNP output. 3 This includes situations in which the SL-C Series is off and in which the power supply line is disconnected. 4 The wiring resistance between the OSSD output and the connected equipment (excluding the wiring resistance of the optional dedicated cable) must be 2.5 ? or less to ensure that the SL-C Series operate correctly. If using the NPN output