Датчик безопасности Keyence SL-C28L

Main Unit, General-purpose Type, 28 Optical Axes

Описание
Получить КП

Model	SL-C28L
Effective aperture angle	Max. ±2.5 ° (when operating distance is at least 3 m)
Response time	15 ms *1
Light source	Infrared LED (850 nm)
Operation mode	Turned on when light is being applied to all optical axes (excluding when the blanking function is used)
Detection capability	o45 mm*2
No. of beam axes	28
Detection zone	1080 mm
Protection area	1165 mm
Detectingdistance	0.3 to 9 m
Beam axis interval	40 mm
Lens diameter	o5mm
OSSD output	Output type	2 outputs each for PNP and NPN, Can be switched using the connection connector cable
Max. load current	300 mA *3
OFF-state voltage	2.5 V (with a cable length of 7 m)
Leakage current	100 µA maximum*4
Max. capacitive load	2.2 µF (with a load resistance of 100 ?)
Load wiring resistance	2.5 ? maximum*5
Approved standards	EMC	EMS	UL61496-1
EMI	FCC Part15 Class A
Safety	UL61496-1 (type 4 ESPE), UL61496-2 (type 4 AOPD),UL508
Current consumption	Transmitter	71 mA
Receiver	78 mA
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
Environmental resistance	Enclosure rating	IP65 (IEC60529)
Ambient light	Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less
Operating ambient temperature	-10 to +55 °C (No freezing)
Storage temperature	-10 to +60 °C (No condensation
Operating relative humidity	35 to 85 % RH (No condensation)
Storage relative humidity	35 to 95 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions
Shock resistance	100 m/s2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Weight	Transmitter	Approx 705 g
Receiver	Approx 775 g
1 OFF>ON return time is 125 ms. 2 If the SL-CL Series, which has a minimal detection object diameter of 45 mm, is used in conjunction with the SL-R12EX, the blanking function and muting function cannot be used. 3 Note the derating illustrated in the graph to the right when using PNP output. 4 This includes situations in which the SL-C Series is off and in which the power supply line is disconnected. *5 The wiring resistance between the OSSD output and the connected equipment (excluding the wiring resistance of the optional dedicated cable) must be 2.5 ? or less to ensure that the SL-C Series operate correctly. If using the NPN output

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-datchiki.ru с указанием требуемых позиций и реквизитами компании.