Датчик безопасности Keyence SL-C36HM

Main Unit, Robust Type, 36 Optical Axes

Описание
Получить КП

Model	SL-C36HM
Effective aperture angle	Max. ±2.5 ° (when operating distance is at least 3 m)
Response time	15 ms *1
Light source	Infrared LED (850 nm)
Operation mode	Turned on when light is being applied to all optical axes (excluding when the blanking function is used)
Detection capability	o25 mm (when the blanking function is not used)
No. of beam axes	36
Detection zone	700 mm
Protection area	745 mm
Detectingdistance	0.25 to 9 m
Beam axis interval	20 mm
Lens diameter	?
OSSD output	Output type	2 outputs each for PNP and NPN, Can be switched using the connection connector cable
Max. load current	300 mA *2
OFF-state voltage	2.5 V (with a cable length of 7 m)
Leakage current	100 µA maximum*3
Max. capacitive load	2.2 µF (with a load resistance of 100 ?)
Load wiring resistance	2.5 ? maximum*4
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
EMI	EN55011 Class A, FCC Part15 Class A
Safety	IEC61496-1, EN61496-1, UL61496-1 (type 4 ESPE),IEC61496-2, EN61496-2, UL61496-2 (type 4 AOPD),UL508
Current consumption	Transmitter	77 mA
Receiver	83 mA
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
Environmental resistance	Enclosure rating	IP65 (IEC60529)*5
Ambient light	Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less
Operating ambient temperature	-10 to +55 °C (No freezing)
Storage temperature	-10 to +60 °C (No condensation
Operating relative humidity	35 to 85 % RH (No condensation)
Storage relative humidity	35 to 95 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions
Shock resistance	100 m/s2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Weight	Transmitter	Approx 2.5 kg
Receiver
1 OFF>ON return time is 125 ms. 2 Note the derating illustrated in the graph to the right when using PNP output. 3 This includes situations in which the SL-C Series is off and in which the power supply line is disconnected. 4 The wiring resistance between the OSSD output and the connected equipment (excluding the wiring resistance of the optional dedicated cable) must be 2.5 ? or less to ensure that the SL-C Series operate correctly. If using the NPN output *5 The SL-CHM Series attains a protection rating of IP65 because the main unit’s sensor is enclosed in an aluminum case.