Model	SZ-V32N*1
Type	Network Type
Detection capability	Minimum detectable object size	Diameter: 20, 30, 40, 50, 70, 150 mm (depends on the setting); Reflectance: 1.8% min.; Speed: 1.6 m/s max.*2
Detectable angle	190° (-5° to 185°)
Response time (ON to OFF)	Standard Mode	Scan Cycle A	160 ms (2 scans) to 1280 ms (16 scans)34
Scan Cycle B	168 ms (2 scans) to 1344 ms (16 scans)34
Scan Cycle C	176 ms (2 scans) to 1408 ms (16 scans)34
High Speed Mode	Scan Cycle A	80 ms (2 scans) to 640 ms (16 scans)34
Scan Cycle B	84 ms (2 scans) to 672 ms (16 scans)34
Scan Cycle C	88 ms (2 scans) to 704 ms (16 scans)34
Response time (OFF to ON)	Response time of ON to OFF + 150 ms
Protection zone	Minimum detectable object size: 70 / 150 mm	Standard Mode: 8.4 m / High Speed Mode: 5.7 m
Minimum detectable object size: 50 mm	Standard Mode: 5.6 m / High Speed Mode: 3.8 m
Minimum detectable object size: 40 mm	Standard Mode: 4.3 m / High Speed Mode: 2.9 m
Minimum detectable object size: 30 mm	Standard Mode: 2.9 m / High Speed Mode: 2.0 m
Minimum detectable object size: 20 mm	Standard Mode: 1.6 m / High Speed Mode: 1.1 m
Warning zone	Minimum detectable object size: 70 / 150 mm	Standard Mode: 26 m / High Speed Mode: 23 m*5
Minimum detectable object size: 50 mm	Standard Mode: 25 m / High Speed Mode: 21 m*5
Minimum detectable object size: 40 mm	Standard Mode: 24 m / High Speed Mode: 20 m*5
Minimum detectable object size: 30 mm	Standard Mode: 23 m / High Speed Mode: 18 m*5
Minimum detectable object size: 20 mm	Standard Mode: 21 m / High Speed Mode: 15 m*5
Additional safety distance	100 mm*6
Maximum measurement distance	60 m*7
Maximum number of banks	Max. 32 banks*8
Multiple scanner heads	Max. 3
Camera	-*9
Display	QVGA 2.2 inch colour LCD
Light source	Type, wavelength	Infrared laser diode, 905 nm
Laser class	IEC	Class 1 IEC / EN 60825-1
FDA	Class 1 FDA 21 CFR 1040.10, 1040.11 (Laser Notice No.50)*10
JIS	Class 1 JIS C6802
Control output (OSSD output)	Output type	PNP or NPN transistor output (settings configurable with SZ-V Configurator)
Number of outputs	2 outputs
Max. load current	500 mA*11
Residual voltage	Max. 2.5 V (with a cable length of 5 m)
OFF-state voltage	Max. 2.0 V (with a cable length of 5 m)
Leakage current	Max. 1 mA*12
Max. capacitive load	2.2 µF (with a load resistance of 100 ?)
Load wiring resistance	Max. 2.5 ?
Input (safety-related)	PNP	ON-voltage: 10 to 30 V, OFF-voltage: Open or 0 to 3 V, Short-circuit current: Approx. 2.5 mA (EDM input: Approx. 10 mA)
NPN	ON-voltage: 0 to 3 V, OFF-voltage: Open or 10 V to Power voltage, Short-circuit current: Approx. 2.5 mA (Approx. 10 mA for EDM)
Non safety-related output (AUX output)	Output type	Transistor output (PNP or NPN, settings configurable with SZ-V Configurator)
Number of outputs	4 outputs
Max. load current	50 mA
Residual voltage (during ON)	Max. 2.5 V (with a cable length of 5 m)
Muting lamp	Connectable to incandescent lamp (24 VDC, 1 to 5.5 W) and LED lamp (load current: 10 to 230 mA)
Interface	USB	USB 2.0
Ethernet	Standard	IEEE802.3u (100BASE-TX)
Transmission rate	100 Mbps
Cable	Category5 or higher STP (Shielded Twisted Pair) or UTP (Unshielded Twisted Pair) cable
Connector	RJ45 (IP65 connector) 2 ports
Networking/data output	PROFIsafe, PROFINET, EtherNet/IPTM, UDP
Cable length	Power cable	30 m or less*13
Connection cable	20 m or less each*14
Ethernet cable	100 m or less*15
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1 (Type3 ESPE)
EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
Safety	IEC61496-1, EN61496-1, UL61496-1 (Type3 ESPE), IEC61496-3, EN61496-3 (Type3 AOPDDR), IEC61508, EN61508, IEC62061, EN62061 (SIL2/SILCL2), EN ISO13849-1:2015 (PLd, Category3), IEC61784-3-3, UL508, UL1998, CSA C22.2 No.14, CSA C22.2 No.0.8
Rating	Power consumption	13.4 W (without load), 50.8 W (with load)*16
Power voltage	When using a converter power supply: 24 VDC ±10 %, Ripple (P-P) 10 % or less When using a battery: 24 VDC +20 % /-30 %
Environmental resistance	Enclosure rating	IP65 (IEC60529)
Ambient light	Incandescent lamp: 1,500 lux or less*17
Operating ambient temperature	-10 to +50 °C (No freezing)
Storage temperature	-25 to +60 °C (No freezing)
Operating relative humidity	35 to 85 % RH (No condensation)
Storage relative humidity	35 to 95 % RH
Vibration resistance	10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions
Shock resistance	100 m/s2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Scanner head	Main unit case	Magnesium
Window	Polycarbonate, PEI
Indicator part	-*9
Display unit	case	Magnesium, PPS, Polycarbonate
System memory	Aluminum, PPE
Weight	Approx. 2,300 g
1 Integrated models include display unit, scanner head, system memory and a connection cable (SZ-VS005). 2 If the object to be detected moves perpendicular to the detection plane, SZ-V cannot detect the object moving at speed over 1.6 m/s, regardless of the encoder setting. 3 The response time, protection zone, and warning zone are affected by the operation mode. 4 When PROFIsafe is used with the SZ-V32N, 6 ms is added to the response time. 5 20% or more reflectance is necessary for the minimum detectable object in the warning zone. 6 If there is a highly reflective background within 1.5 m from the boundary of the protection zone, 200 mm must be added as supplementary necessary distance to the protection zone when calculating the minimum safety distance. 7 Even when using the network data output, the maximum measured output distance is 60 m. 8 When PROFIsafe is used with the SZ-V32N, maximum number of banks is 16. 9 Only applicable for the type with a camera. 10 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. 11 The load current calculation of the OSSD output and AUX output is 1.2 A or less when using one scanner head, 0.8 A or less when using two scanner heads, and 0.3 A or less when using three scanner heads. 12 Includes when the power is OFF. 13 10 m or less when supplying power from a battery. 14 When supplying power from a battery, the length of each connection cable should be 10 m or less when using two scanner heads, and 5 m or less when using three scanner heads. 15 Distance between SZ-V and Ethernet switch 16 When using the SZ-V with series connected sensor heads, it is necessary to add 9.4 W per scanner head. Also, power consumption may temporarily be higher (maximum 3.6 W). Power consumption will be within the specification after SZ-V moves to normal operation. *17 An ambient light source should not be located within ±5° of the detection plane.

Previous product

Датчик безопасности Keyence OP-88090

Next product

Датчик безопасности Keyence SZ-VB02

Датчик безопасности Keyence SZ-V32N

Network type

Описание
Получить КП

Описание

Model	SZ-V32N*1
Type	Network Type
Detection capability	Minimum detectable object size	Diameter: 20, 30, 40, 50, 70, 150 mm (depends on the setting); Reflectance: 1.8% min.; Speed: 1.6 m/s max.*2
Detectable angle	190° (-5° to 185°)
Response time (ON to OFF)	Standard Mode	Scan Cycle A	160 ms (2 scans) to 1280 ms (16 scans)34
Scan Cycle B	168 ms (2 scans) to 1344 ms (16 scans)34
Scan Cycle C	176 ms (2 scans) to 1408 ms (16 scans)34
High Speed Mode	Scan Cycle A	80 ms (2 scans) to 640 ms (16 scans)34
Scan Cycle B	84 ms (2 scans) to 672 ms (16 scans)34
Scan Cycle C	88 ms (2 scans) to 704 ms (16 scans)34
Response time (OFF to ON)	Response time of ON to OFF + 150 ms
Protection zone	Minimum detectable object size: 70 / 150 mm	Standard Mode: 8.4 m / High Speed Mode: 5.7 m
Minimum detectable object size: 50 mm	Standard Mode: 5.6 m / High Speed Mode: 3.8 m
Minimum detectable object size: 40 mm	Standard Mode: 4.3 m / High Speed Mode: 2.9 m
Minimum detectable object size: 30 mm	Standard Mode: 2.9 m / High Speed Mode: 2.0 m
Minimum detectable object size: 20 mm	Standard Mode: 1.6 m / High Speed Mode: 1.1 m
Warning zone	Minimum detectable object size: 70 / 150 mm	Standard Mode: 26 m / High Speed Mode: 23 m*5
Minimum detectable object size: 50 mm	Standard Mode: 25 m / High Speed Mode: 21 m*5
Minimum detectable object size: 40 mm	Standard Mode: 24 m / High Speed Mode: 20 m*5
Minimum detectable object size: 30 mm	Standard Mode: 23 m / High Speed Mode: 18 m*5
Minimum detectable object size: 20 mm	Standard Mode: 21 m / High Speed Mode: 15 m*5
Additional safety distance	100 mm*6
Maximum measurement distance	60 m*7
Maximum number of banks	Max. 32 banks*8
Multiple scanner heads	Max. 3
Camera	-*9
Display	QVGA 2.2 inch colour LCD
Light source	Type, wavelength	Infrared laser diode, 905 nm
Laser class	IEC	Class 1 IEC / EN 60825-1
FDA	Class 1 FDA 21 CFR 1040.10, 1040.11 (Laser Notice No.50)*10
JIS	Class 1 JIS C6802
Control output (OSSD output)	Output type	PNP or NPN transistor output (settings configurable with SZ-V Configurator)
Number of outputs	2 outputs
Max. load current	500 mA*11
Residual voltage	Max. 2.5 V (with a cable length of 5 m)
OFF-state voltage	Max. 2.0 V (with a cable length of 5 m)
Leakage current	Max. 1 mA*12
Max. capacitive load	2.2 µF (with a load resistance of 100 ?)
Load wiring resistance	Max. 2.5 ?
Input (safety-related)	PNP	ON-voltage: 10 to 30 V, OFF-voltage: Open or 0 to 3 V, Short-circuit current: Approx. 2.5 mA (EDM input: Approx. 10 mA)
NPN	ON-voltage: 0 to 3 V, OFF-voltage: Open or 10 V to Power voltage, Short-circuit current: Approx. 2.5 mA (Approx. 10 mA for EDM)
Non safety-related output (AUX output)	Output type	Transistor output (PNP or NPN, settings configurable with SZ-V Configurator)
Number of outputs	4 outputs
Max. load current	50 mA
Residual voltage (during ON)	Max. 2.5 V (with a cable length of 5 m)
Muting lamp	Connectable to incandescent lamp (24 VDC, 1 to 5.5 W) and LED lamp (load current: 10 to 230 mA)
Interface	USB	USB 2.0
Ethernet	Standard	IEEE802.3u (100BASE-TX)
Transmission rate	100 Mbps
Cable	Category5 or higher STP (Shielded Twisted Pair) or UTP (Unshielded Twisted Pair) cable
Connector	RJ45 (IP65 connector) 2 ports
Networking/data output	PROFIsafe, PROFINET, EtherNet/IPTM, UDP
Cable length	Power cable	30 m or less*13
Connection cable	20 m or less each*14
Ethernet cable	100 m or less*15
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1 (Type3 ESPE)
EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
Safety	IEC61496-1, EN61496-1, UL61496-1 (Type3 ESPE), IEC61496-3, EN61496-3 (Type3 AOPDDR), IEC61508, EN61508, IEC62061, EN62061 (SIL2/SILCL2), EN ISO13849-1:2015 (PLd, Category3), IEC61784-3-3, UL508, UL1998, CSA C22.2 No.14, CSA C22.2 No.0.8
Rating	Power consumption	13.4 W (without load), 50.8 W (with load)*16
Power voltage	When using a converter power supply: 24 VDC ±10 %, Ripple (P-P) 10 % or less When using a battery: 24 VDC +20 % /-30 %
Environmental resistance	Enclosure rating	IP65 (IEC60529)
Ambient light	Incandescent lamp: 1,500 lux or less*17
Operating ambient temperature	-10 to +50 °C (No freezing)
Storage temperature	-25 to +60 °C (No freezing)
Operating relative humidity	35 to 85 % RH (No condensation)
Storage relative humidity	35 to 95 % RH
Vibration resistance	10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions
Shock resistance	100 m/s2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Scanner head	Main unit case	Magnesium
Window	Polycarbonate, PEI
Indicator part	-*9
Display unit	case	Magnesium, PPS, Polycarbonate
System memory	Aluminum, PPE
Weight	Approx. 2,300 g
1 Integrated models include display unit, scanner head, system memory and a connection cable (SZ-VS005). 2 If the object to be detected moves perpendicular to the detection plane, SZ-V cannot detect the object moving at speed over 1.6 m/s, regardless of the encoder setting. 3 The response time, protection zone, and warning zone are affected by the operation mode. 4 When PROFIsafe is used with the SZ-V32N, 6 ms is added to the response time. 5 20% or more reflectance is necessary for the minimum detectable object in the warning zone. 6 If there is a highly reflective background within 1.5 m from the boundary of the protection zone, 200 mm must be added as supplementary necessary distance to the protection zone when calculating the minimum safety distance. 7 Even when using the network data output, the maximum measured output distance is 60 m. 8 When PROFIsafe is used with the SZ-V32N, maximum number of banks is 16. 9 Only applicable for the type with a camera. 10 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. 11 The load current calculation of the OSSD output and AUX output is 1.2 A or less when using one scanner head, 0.8 A or less when using two scanner heads, and 0.3 A or less when using three scanner heads. 12 Includes when the power is OFF. 13 10 m or less when supplying power from a battery. 14 When supplying power from a battery, the length of each connection cable should be 10 m or less when using two scanner heads, and 5 m or less when using three scanner heads. 15 Distance between SZ-V and Ethernet switch 16 When using the SZ-V with series connected sensor heads, it is necessary to add 9.4 W per scanner head. Also, power consumption may temporarily be higher (maximum 3.6 W). Power consumption will be within the specification after SZ-V moves to normal operation. *17 An ambient light source should not be located within ±5° of the detection plane.

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.

Категория: Безопасность