Датчик идентификации Keyence BL-1370

Ultra Small Digital Barcode Reader, Long-distance Type, Front Single

Описание
Получить КП

Model	BL-1370
Type	Long-range
Type	Reading direction	Front
Scanning method	Single
Laser	Light source	Visible red semiconductor laser (660 nm wavelength)
Control output	85 µW
Pulse duration	112 µs
Laser class	Class 2 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10*1)
Reading	Supported codes	CODE 39, ITF, Industrial 2of5, Standard 2of5, COOP 2of5, NW-7 (Codabar), CODE 128, GS1-128, CODE 93, EAN/UPC, GS1 DataBar
Number of readable digits	74 digits (148 digits with CODE 128 start character C)
Readable bar width	0.15 mm to
Reading distance	160 to 600 mm*2 (1.0 mm narrow bar width)
Focal point	230 mm
Largest readable label width	404 mm*2 (420 mm distance, 1.0 mm narrow bar width)
PCS	0.4 or more
Scanning rate	500 to 1,300 scans/second
I/O specifications	Input terminals	Number of inputs	Two (IN1, IN2)
Input format	non-voltage input (contact or solid-state)
Output terminals	Number of outputs	Four (OUT1 through OUT4)
Output	NPN open collector
Rated load	24 VDC, 30 mA
Leakage current (at OFF)	0.1 mA or less
Residual voltage (at ON)	0.5 V or less
Serial interface	Communication method	Conforms to EIA, RS-232C
Communication speed	600, 1,200, 2,400, 4,800, 9,600, 19,200, 31,250, 38,400, 57,600, 115,200 bps
Synchronisation between the transmitter and receiver	Asynchronous
Data bit length	7/8 bits
Stop bit length	1/2 bits
Parity check	None/Even/Odd
Rating	Power voltage	5 VDC ±5 %
Voltage consumption	400 mA or less
Environmental resistance	Enclosure rating	IP65
Ambient light	10,000 lux (sunlight), 6,000 lux (Incandescent lamp)
Operating environment	No dust or corrosive gas present
Ambient temperature	0 to +45 °C
Storage temperature	-20 to +60 °C
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Weight	Approx. 115 g
1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. 2 Specifications for 500-scan/second operation Use the Limited Power Source defined in UL/IEC60950-1 to comply with UL/IEC60950-1. Internal body settings are written in the internal memory area (can be rewritten 100,000 times).

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.