Датчик идентификации Keyence BL-180SO(7030)

Ultra Small CCD Barcode Reader, Front Type

Описание
Получить КП

Model	BL-180SO(7030)
Reading direction	Front
Light source/Light receiving element	LED/CCD image sensor
Reading distance	33 ±10 mm *1 (Using narrow bars of at least 0.19 mm in width)
Readable bar width	0.125 to 1.0 mm *2
Largest readable label width	80 mm *3 (Using narrow bars of at least 0.19 mm in width)
PCS	0.45 or more (Refl ectance of white part: 75% or more)
Scanning rate	500 scans/sec
Supported codes	CODE39, ITF, Industrial 2-of-5, COOP 2-of-5, Codabar, CODE128, EAN/UPC (A·E)
Number of readable digits	32 digits
Trigger input	Non-voltage input (contact or solid-state), TTL input is also possible.
Serial interface	Applied standard	RS-232C
Synchronisation	Start-Stop
Transmission code	ASCII
Baud rate	600/1200/2400/4800/9600/19200/31250/38400 bps
Data length	7/8 bits
Parity check	None/Even/Odd
Stop bit length	1 bit/2 bits
OK/NG output	Output form	NPN
Rated load	24 VDC, 100 mA
Leakage current (at OFF)	0.1 mA max.
Residual voltage (at ON)	0.5 V max.
Rating	Power voltage	5 VDC ±5 %*4
Current consumption	300 mA
Environmental resistance	Ambient light	Sunlight/Incandescent lamp: 10,000 lux, Fluorescent lamp: 3,000 lux.
Operating environment	No dust or corrosive gas present
Ambient temperature	0 to +40 °C
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Weight	Approx. 165 g
1 33 ±5 mm when the narrowest bar is less than 0.19 mm. 2 Readable bar width indicates the range of the narrowest readable bar. 3 60 mm when the narrowest bar is less than 0.19 mm. 4 Use a stable power supply of 5 VDC ±5 % .

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.