Датчик идентификации Keyence IV-H500MA

Model	IV-H500MA
Type	Standard distance
Installed distance	50 to 500 mm
View	Installed distance 50 mm: 25 (H) x 18 (V) mm to installed distance 500 mm: 210 (H) x 157 (V) mm
Image sensor	Type	1/3 inch monochrome CMOS
Pixel	752 (H) x 480 (V)
Focus adjustment	Auto*1
Exposure time	1/10 to 1/25,000
Lights	Illumination	Red LED
Lighting method	Pulse lighting/DC lighting is switchable
Tools	Type	Shape Detection, Colour Area2, Area3, Edge Pixels, Width/Height, Diameter, Edge Presence, Pitch, Position Adjustment, High Speed Position Adjustment (1-Axis/2-Axis Adjustment)
Number	Detection tools: 16 tools, position adjustment tool: 1 tool*4
Switch settings (programs)	32 programmes
Image history	Numbers	300 images56
Condition	NG only/All is selectable*6
Analysis information	OFF/Statistics/Histograms/Matching rate list is switchable Statistics: Processing time (latest value, MAX, MIN, AVE), number of OKs, number of NGs, trigger numbers, trigger errors, judgement results list by tools Histograms: Histogram, matching degree (latest value, MAX, MIN, AVE), numbers of OKs, numbers of NGs Matching rate list: Judgment results list by tools, matching rate list by tools, judgment bar list by tools*7
Other functions	HDR, HighGain, Colour filters2, Digital zoom3, Brightness correction, Tilt correction, White balance2, Mask function, Colour histogram, Test run, ToolAutoTune, Input monitor, Output test, Security settings, Simulator8, Sensor date/time information addition, Scaling function, Failing sensor list, Failure hold
Indicators	PWR/ERR, OUT, TRIG, STATUS, LINK/ACT
Input	Type	Non-voltage input/voltage input is switchable For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit) For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)
Inputs	6 inputs (IN1 to IN6)
Function	IN1: External trigger, IN2 to IN6: Enable by assigning the optional functions Assignable functions: Programme switching, Clear error, External master image registration
Output	Type	Open collector output NPN/PNP is switchable, N.O./N.C. is switchable For open collector NPN output: Maximum rating 26.4 V 50 mA, remaining voltage 1.5 V or lower For open collector PNP output: Maximum rating 26.4 V 50 mA, remaining voltage 2 V or lower
Outputs	4 outputs (OUT1 to OUT4)
Function	Enable by assigning the optional functions Assignable functions: Total judgement result, RUN, BUSY, Error, Position adjustment result, Judgement result of each tool, Result of the logical operation of each tool, Main unit/expansion unit logical output
Ethernet	Standard	100BASE-TX/10BASE-T*9
Connector	M12 4pin connector*9
Network function	FTP client, EtherNet/IPTM, PROFINET
Rating	Power voltage	24 VDC ±10 % (including ripple)
Current consumption	0.6 A or less
Environmental resistance	Enclosure rating	IP67*10
Ambient temperature	0 to +50 °C (No freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions*11
Shock resistance	500 m/s2, 3 times in each of 6 directions*11
Material	Main unit case: Aluminium die-casting, Packing: NBR, Front cover: Acrylic, Mounting adapter: POM
Weight	Approx. 270 g
1 The focusing position can be automatically adjusted at the time of installation. Deactivated during the operation. Focusing position can be registered by programme. 2 Colour type only 3 Possible with both the colour type and monochrome type 4 Tools can be installed by programmes. 5 When using the FTP client function: 210 pictures 6 Saves to the memory in the sensor. The images saved in the sensor can be backed up to the USB memory installed to the intelligent monitor (IV-M30) or to the PC by the software for IV (IV-H1). 7 This can be displayed on the intelligent monitor (IV-M30) or by software for IV (IV-H1). 8 Simulator can be used with the IV software (IV-H1). 9 This is for connection with the intelligent monitor (IV-M30) or software for IV (IV-H1). 10 Except when polarised filter attachment (OP-87436/OP-87437) is mounted *11 Except when IV-G dome attachment (IV-D10) is mounted

Датчик идентификации Keyence N-L20

Датчик идентификации Keyence BL-1371

Датчик идентификации Keyence NX-C08R

Датчик идентификации Keyence BL-N70VE

Датчик идентификации Keyence OP-77469

Датчик идентификации Keyence OP-77467

Датчик идентификации Keyence BL-H13WE

Датчик идентификации Keyence N-R4

Датчик идентификации Keyence IV-H500MA

Похожие товары