Model | SR-752*1 | ||
Type | Long-range type | ||
Receiver | Sensor | CMOS Image Sensor | |
Number of pixels | 752 ? 480 pixels | ||
Lighting | Light source | Red LED | |
Laser pointer | Visible semiconductor laser, Wavelength 660 nm | ||
Output | 60 µW | ||
Pulse duration | 200 µs | ||
Laser class | Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10*2) | ||
Reading specifications | Minimum resolution | 2D | 0.19 mm |
Barcode | 0.17 mm | ||
Supported symbol | 2D | QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF, Composite Code (CC-A, CC-B, CC-C) | |
Barcode | GS1DataBar,CODE39,ITF,NW-7 (Codabar),CODE128,GS1-128,JAN/EAN/UPC,CODE39 FullASCII, CODE93,2of5 (Industrial 2of5),COOP 2of5,Trioptic CODE39 |
||
Reading distance (typical examples) | DataMatrix QR | 180 to 305 mm (Cell size = 0.5 mm) |
|
Barcode | 180 to 330 mm (Narrow bar width = 0.5 mm) |
||
Focal distance | 250 mm | ||
Field of view (at focal distance) | 65.0 mm ? 41.5 mm | ||
I/O specifications | Control input | Number of inputs | 2 |
Input type | Bidirectional voltage input | ||
Maximum rating | 26.4 VDC | ||
Minimum ON voltage | 15 VDC | ||
Maximum OFF current | 0.2 mA or less | ||
Control output | Number of outputs | 3 | |
Output type | Photo MOS relay output | ||
Maximum rating | 30 VDC | ||
Maximum load current | 1 output: 50 mA or less, Total of 3 outputs: 100 mA or less | ||
Leakage current when OFF | 0.1 mA or less | ||
Residual voltage when ON | 1 V or less | ||
Ethernet | Communication standard | 10BASE-T/100BASE-TX | |
Supported protocol | TCP/IP, FTP, SNTP, BOOTP, EtherNet/IPTM, PROFINET, MC protocol, KV STUDIO | ||
Serial communication | Communication standard | RS-232C compliant | |
Transmission speed | 9600, 19200, 38400, 57600, 115200 bps | ||
Supported protocol | Non-procedural, MC protocol, SYSWAY, KV STUDIO | ||
Rating | Power voltage | Control port: 24 VDC ±10 % or Ethernet port: PoE TypeA/B 36 to 57 V (Cannot supply at the same time)*3 | |
Current consumption | Control port: 220 mA (When 24 VDC power supply is used) Ethernet port: PoE Power Class 2*4 |
||
Environmental resistance | Enclosure rating | IP65 | |
Ambient light | Sunlight: 10,000 lux, Incandescent lamp: 6,000 lux, Fluorescent lamp: 2,000 lux | ||
Operating environment | No dust or corrosive gas present | ||
Ambient temperature | 0 to +45 °C | ||
Storage temperature | -10 to +50 °C | ||
Relative humidity | 35 to 95 % RH (No condensation) | ||
Storage relative humidity | |||
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 55 to 500 Hz, Acceleration 5G, 3 hours in each of the X, Y, and Z directions | ||
Weight | Approx. 175 g | ||
*1 PROFINET is a trademark or registered trademark of PROFIBUS International. EtherNet/IPTM is a trademark or registered trademark of ODVA. *2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. *3 To comply with CSA No.61010-1/UL61010-1/IEC61010-1, use the following power supply. – one that provides Class 2 output as defined in the CEC and NEC, or – one that has been evaluated as a Limited Power Source as defined in CAN/CSA-C22.2 No.60950-1/UL60950-1/IEC60950-1. *4 Peak operating current for PoE Power Class 2: 210 mA maximum. |
Датчик идентификации Keyence SR-752
Ethernet-compatible 2D Code Reader, Long-distance Type
Описание
Получить КП
Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.
Категория: Датчики идентификации
Похожие товары
Датчик идентификации Keyence BL-1350HA
Ultra Small Digital Barcode Reader, High-resolution Type, Side Single
Датчик идентификации Keyence OP-80616
Round 12 pin connector - D-sub 9 pin Conversion connector (0.2 m)
Датчик идентификации Keyence BL-N70UBE
Light and Small Laser Handy Barcode Reader, USB Type (English Version)
Датчик идентификации Keyence BL-1301
Ultra Small Digital Barcode Reader, Standard Type, Front Raster