Датчик измерения Keyence GT2-71CP

Amplifier Unit, Connector Type, PNP

Описание
Получить КП

Model	GT2-71CP
Output	PNP output
Mounting type	DIN-rail mount
Main unit/Expansion unit	Main unit
Power consumption	Normal	2,200 mW max. (30 V, 73.3 mA max.)
Power saving (Eco)	1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display	6 + 1/2-digit 7-segment LED (red)
Other displays	2-colour, 13-level bar LED display (red, green), indicators (red, green)
Display range	-199.999.9 to 199.999.9
Display resolution	0.1 ?m
Sampling rate	1,000 times/sec.
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	PNP open collector, 30 V 50 mA or less, residual voltage 1 V or less12
Analogue output	–
Response time	hsp (3 ms), 5 ms, 10 ms, 100 ms, 500 ms, 1 s
Environmental resistance	Ambient temperature	-10 to +50 °C (No freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Materials	Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight	Approx. 70 g
1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC, Control output current: 20 mA or less, (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC, Control output current: 10 mA or less (including the DL-RB1A output current), Residual voltage: 1.5 V or lower, (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 2 The GT2-71MCN(P) does not have HH/LL.

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.