Датчик измерения Keyence LK-011

Sensor Head, Small Spot

Описание
Получить КП

Model	LK-011
Type	Sensor head Compact high-accuracy Sensor head
Measurement mode	Normal,mirror surface
Reference distance	10 mm (Normal),7.0 mm (mirror surface)
Measuring range	±1 mm (Normal),±0.9 mm (mirror surface)
Light source	Type	Visible red semiconductor laser
Wavelength	670nm (Visible light), Class 2 laser product (JIS C6802)
Output	0.95 mW maximum
Laser Class	FDA (CDRH) 21CFR Part 1040.10	Class 2 Laser Product
Laser Class	IEC 60825-1
Spot diameter (at standard distance)	Approx. 20 µm
Linearity	±0.25% of F.S. *1
Repeatability	0.1 µm*2
Analogue output	Output voltage	±10 V (±9 V) (0.1 µm/mV)*3
Impedance	100 ?
Output current	4 to 20 mA (Applicable load: 350 ? max.)
Alarm output	NPN: 100 mA max. (40 V max.) (N.C.), Residual voltage: 1 V max.
Sampling cycle	128, 256, 512, 2,048 µs (selectable)
Other functions	Auto-zero, analog output holding when an alarm occurs, gain switching, response switching, span and shift adjustment of mirror surface measurement mode, changing the sampling cycle
Temperature characteristics	0.04% of F.S./°C
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
Maximum current consumption	400 mA max.
Environmental resistance	Enclosure rating	IP64
Ambient light	Incandescent or fl uorescent lamp: 10,000 lux max.
Ambient temperature	0 to +50 °C (No condensation)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material	Aluminium die-cast
Weight	Approx. 80 g (including cable)
1 Linearity was obtained using KEYENCE’s standard target (Zirconia block gauge: LK-031/036, LK-081/086, LK-011, White ceramic block gauge: LK-501/503). 2 Repeatability was obtained using KEYENCE’s analogue sensor controller (RD-50) with the number of averaging measurements set to 64. Note: The ripple of the analogue output may be 1 mV or more due to co mmon mode noise when observed with an oscilloscope or a high-speed A/D conversion board. *3 When measurement is impossible, 12 V (31.2 mA) is output.

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-datchiki.ru с указанием требуемых позиций и реквизитами компании.