Датчик измерения Keyence LS-7001

Controller, without Monitor Function

Описание
Получить КП

Model	LS-7001*1
Type	Standard
No. of connectable sensor heads	2 (fully compatible for all head types except monitor (M) models)
Display	Measurement display	Main display: 7-segment red LED (Character height: 20.3 mm) Sub-display: 7-segment red LED (Character height: 9.9 mm) x 3
Minimum display unit	0.01 to 100 µm (7-level selectable)
Display range	±99.99999 to 9,999.9 mm (Linked to minimum display unit setting, mm/µm selectable)
Measurement position monitor	7-level display with a red LED
Tolerance check output display	Green LED (GO), Red LED x 2 (HI, LO)
Input terminal block	Synchronous 1, 2 input	Non-voltage input for OUT1
Auto-zero 1, 2 input
Reset 1, 2 input
Statistics 1, 2 input	–
Program selection input	Non-voltage input x 4 inputs
Output terminal	Analogue voltage output	±10 V x 2 outputs
Alarm output	NPN open-collector output (N.C.)
Total judgment output	NPN open-collector output for OUT1
Comparator ready output
Strobe 1, 2 output
Connector I/O	SUB mode	Statistical processing output	–
Function output	Selectable from focus, area check, and differential, NPN open-collector output x 2 outputs*2
5-level comparator output	NPN open-collector output for OUT2*2
Comparator ready output
Strobe output
BCD mode	BCD output	Measurement data output (Sign + 7 digits), OUT1/OUT2 selectable, NPN open-collector output*2
BCD selection output	NPN open-collector output*2
BCD selection input	Non-voltage input*2
Statistical processing input	–
Synchronous input	Non-voltage input for OUT2
Reset input
Auto-zero input
Interface	RS-232C	Measurement data output and control I/O, printer (Baud rate can be selected up to 115,200 bps.)
Video output	–
Major functions	Simultaneous measurement, Area designation, Calculation, Averaging, Calibration, 16-program memory, Measurement modes, Auto-zero, Print-out, Abnormal value elimination, Transparent object measurement, Mutual interference prevention, etc.
Rating	Power voltage	24 VDC ±10 %*3
Power consumption	0.7 A max.*3
Environmental resistance	Enclosure rating	IP64 (Panel surface only)
Ambient temperature	0 to +40 °C
Relative humidity	35 to 85 % RH (No condensation)
Weight	Approx. 820 g
1 The rating of the NPN open-collector inside the terminal block is: 100 mA max. (40 V max.), residual voltage of 0.5 V max. The rating of the NPN open-collector inside the connector I/O is: 30 mA max. (30 V max.), residual voltage of 0.5 V max. The rating of non-voltage input is: ON voltage of 1 V max., OFF current of 0.6 mA max. 2 Either SUB mode or BCD mode can be selected. *3 AC power supply can be used when the LS-S11 (AC power supply stand) is connected.

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-datchiki.ru с указанием требуемых позиций и реквизитами компании.