Model	LT-9031
Type	Long-range
Measurement range	±1.0 mm
Reference distance	30 mm
Light source	Type	Red semiconductor laser
Wavelength	655 nm
Output	170 µW (IEC 60825-1) /3.0 µW (FDA (CDRH) Part 1040.10)
Laser Class	Class IIa Laser Product (FDA (CDRH) Part 1040.10) Class 1 Laser Product (IEC 60825-1)
Spot diameter	Approx. o7 µm
Scan width/interval	0 to 560 µm (6 steps) /1 to 8 µm (4 steps)
Resolution	0.3 µm*1
Linearity	±0.3 % of F.S.*1
Sampling cycle	640 µs to 187 ms (14 steps)*2
Display	Minimumdisplayable unit	0.1 µm*3
Display range	±9,999.99 µm
Microscope function	?
Display cycle	10 times/sec.*4
Terminal block	Analogue output	±10 V x 2 outputs, output impedance: 100 ?
Timing input	Non-voltage input
Reset input
Auto-zero input
Monitor dedicated power supply	24 VDC*5
Control I/O	Judgment mode	3-step limits output	For OUT1 and OUT2, and NPN open collector output*6
Binary mode	Binary output	Measured data output (21 bits), OUT1/OUT2/PROFILE selectable NPN open collector output*6
Strobe output	NPN open collector output*6
Binary selector output
Binary selection input	Non-voltage input*6
Stability output	NPN open collector output
Laser remote input	Non-voltage input
Program switching input	Non-voltage input x 3 inputs
RS-232C interface	Measured data output and control I/O (Selectable up to baud rate 115200 bps.)
Video output	NTSC compliant (PIN connector)
Microscope function	Function presence/absence	N/A
Field of view	?
Type	Unavailable
Illumination light source	?
Main functions	Displacement mode	Distance measurement, Transparent object thickness measurement, Surface selection, Dark-out, Mask, Trend graph display, and Scan width/interval change*7
Profile mode	?*7
Common	Light intensity accumulation, Microscope (LT-9501H, LT-9501HSO (5654) only), Tolerance judgement, 8-program registration, Calibration, Averaging, Hold modes, Auto-zero, and interface language selection
Temperature characteristics (20 to 30°C)	±0.25% of F.S.
Rating	Power voltage	100 to 240 VAC ±10 %, 50/60 Hz
Power consumption	110VA or less
Environmental resistance	Pollution degree	2
Overvoltage category	II
Ambient light	Incandescent lamp/fluorescent lamp: 10,000 lux max.
Ambient temperature	0 to +35 °C
Relative humidity	35 to 85 % RH (No condensation)
Weight	Approx. 500 g
1 The value when the measurement target is a mirrored surface object measured in displacement mode, scan width/interval 120 µm/2 µm, and 8-times average 2 Sampling cycle differs according to the manufacturing variation of individual measuring units. The value when the FINE mode is set to OFF. 3 Display changes every ±0.3 µm. 4 Varies depending on the setting 5 Dedicated power supply for the monitor specified by KEYENCE. 6 Select either the Limits mode or the Binary mode. *7 Select either the Distance mode or the Profile mode. (Only distance mode is available with the LT-9501HSO (5654) and LT-9001HSO (5655).) The rating of the NPN open-collector output is 30 mA (30 V or lower) maximum, and residual voltage is 0.5 V. The rating of the Non-voltage input is ON voltage 1 V or lower, and OFF current 0.6 mA or lower.

Previous product

Датчик измерения Keyence OP-84426

Next product

Датчик измерения Keyence OP-86982

Датчик измерения Keyence LT-9031

Sensor Head, Not Subject to Export Control, without Camera Function

Описание
Получить КП

Описание

Model	LT-9031
Type	Long-range
Measurement range	±1.0 mm
Reference distance	30 mm
Light source	Type	Red semiconductor laser
Wavelength	655 nm
Output	170 µW (IEC 60825-1) /3.0 µW (FDA (CDRH) Part 1040.10)
Laser Class	Class IIa Laser Product (FDA (CDRH) Part 1040.10) Class 1 Laser Product (IEC 60825-1)
Spot diameter	Approx. o7 µm
Scan width/interval	0 to 560 µm (6 steps) /1 to 8 µm (4 steps)
Resolution	0.3 µm*1
Linearity	±0.3 % of F.S.*1
Sampling cycle	640 µs to 187 ms (14 steps)*2
Display	Minimumdisplayable unit	0.1 µm*3
Display range	±9,999.99 µm
Microscope function	?
Display cycle	10 times/sec.*4
Terminal block	Analogue output	±10 V x 2 outputs, output impedance: 100 ?
Timing input	Non-voltage input
Reset input
Auto-zero input
Monitor dedicated power supply	24 VDC*5
Control I/O	Judgment mode	3-step limits output	For OUT1 and OUT2, and NPN open collector output*6
Binary mode	Binary output	Measured data output (21 bits), OUT1/OUT2/PROFILE selectable NPN open collector output*6
Strobe output	NPN open collector output*6
Binary selector output
Binary selection input	Non-voltage input*6
Stability output	NPN open collector output
Laser remote input	Non-voltage input
Program switching input	Non-voltage input x 3 inputs
RS-232C interface	Measured data output and control I/O (Selectable up to baud rate 115200 bps.)
Video output	NTSC compliant (PIN connector)
Microscope function	Function presence/absence	N/A
Field of view	?
Type	Unavailable
Illumination light source	?
Main functions	Displacement mode	Distance measurement, Transparent object thickness measurement, Surface selection, Dark-out, Mask, Trend graph display, and Scan width/interval change*7
Profile mode	?*7
Common	Light intensity accumulation, Microscope (LT-9501H, LT-9501HSO (5654) only), Tolerance judgement, 8-program registration, Calibration, Averaging, Hold modes, Auto-zero, and interface language selection
Temperature characteristics (20 to 30°C)	±0.25% of F.S.
Rating	Power voltage	100 to 240 VAC ±10 %, 50/60 Hz
Power consumption	110VA or less
Environmental resistance	Pollution degree	2
Overvoltage category	II
Ambient light	Incandescent lamp/fluorescent lamp: 10,000 lux max.
Ambient temperature	0 to +35 °C
Relative humidity	35 to 85 % RH (No condensation)
Weight	Approx. 500 g
1 The value when the measurement target is a mirrored surface object measured in displacement mode, scan width/interval 120 µm/2 µm, and 8-times average 2 Sampling cycle differs according to the manufacturing variation of individual measuring units. The value when the FINE mode is set to OFF. 3 Display changes every ±0.3 µm. 4 Varies depending on the setting 5 Dedicated power supply for the monitor specified by KEYENCE. 6 Select either the Limits mode or the Binary mode. *7 Select either the Distance mode or the Profile mode. (Only distance mode is available with the LT-9501HSO (5654) and LT-9001HSO (5655).) The rating of the NPN open-collector output is 30 mA (30 V or lower) maximum, and residual voltage is 0.5 V. The rating of the Non-voltage input is ON voltage 1 V or lower, and OFF current 0.6 mA or lower.

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-datchiki.ru с указанием требуемых позиций и реквизитами компании.

Категория: Датчики измерения