| Model | FS-R0 | |
| Response time | 410 µs to 1.2 ms 2*1 | |
| Expandable inputs | 16 (15 when using stability output) | |
| Number of outputs | 16 | |
| Control output | NPN open-collector 50 mA max. (40 V max.) Residual voltage: 1 V max. | |
| Protection circuit | Reversed polarity protection, Overcurrent protection, Surge absorber | |
| Rating | Power voltage | 12 to 24 VDC ±5 %, Ripple (P-P) 5 % or less*2 |
| Current consumption | 20 mA or less, plus current consumed by expansion units connected | |
| Environmental resistance | Ambient temperature | -10 to +50 °C (No freezing)*3 |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Shock resistance | 500 m/s2, 3 times in each of the X, Y, and Z directions | |
| Case material | Polycarbonate | |
| Weight | Approx. 150 g | |
| *1 The response speed varies depending on the number of expansion units connected. *2 Change the supply voltage to meet the requirement of the input device (PLC, etc.). *3 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 1 to 10 Units: -10 to +50 °C, 11 to 16 Units: -10 to +45 °C. |
Датчик Keyence FS-R0
Wiring-saving Connector Unit
Описание
Получить КП
Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-datchiki.ru с указанием требуемых позиций и реквизитами компании.
Похожие товары
Закрыть
Датчик Keyence FS-15IR
Amplifier Unit
Закрыть
Датчик Keyence FS-L51
Transmissive Sensor Head
Закрыть
Датчик Keyence FS-L41
Reflective Sensor Head
Закрыть
Датчик Keyence F-20
FS-L side-view attachment
Закрыть
Датчик Keyence FS-L70
Amplifier Unit
Закрыть
Закрыть
Датчик Keyence FS2-65
Fibre Amplifier, Cable Type, NPN
Закрыть
Датчик Keyence FS-T22
Fibre Amplifier, Cable Type, NPN