Датчик Keyence GT2-E3P

Extension Board for GT2-100P

Описание
Получить КП

Model	GT2-E3P
Output	PNP output
Mounting type	Installed into GT2-100N/100P (up to 3 boards)
Main unit/Expansion unit	–
Power supply voltage	Supplied from the GT2-100N/100P
Power consumption	Normal	4,200 mW max. (30 V, 140 mA max.)*1?
Power saving (Eco)	4,000 mW max. (30 V, 133.3 mA max.)
Display power	Measured value display	–
Other displays
Display range
Display resolution
Sampling rate	1,000 times/sec.
Control input	Timing/preset/ reset/bank input	No-voltage input
Control output	HH/HI/GO/LO/LL	PNP open collector, 30 V 50 mA or less*2, residual voltage 1 V or less
Response time	hsp (3 ms), 5 ms, 10 ms, 100 ms, 500 ms, 1 s
Environmental resistance	Ambient temperature	-10 to +50 °C (No freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Materials	Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET
Power supply / I/O cable	I/O: 30-pin connector (MIL standard)
Weight	Approx. 80 g
1 For GT2-100 Series, when the maximum number of sensor heads are connected and all units are set to power saving mode. 2 When 2 or more sensor heads are connected, 20 mA or less.

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.