Датчик Keyence GT2-P12

Stylus type General-purpose Sensor head

Описание
Получить КП

Model	GT2-P12*1
Detection system	Scale Shot System II, absolute (no tracking errors) type
Measuring range	12 mm
Resolution	0.5 ?m
Indicated accuracy	2 µm (p-p)*2
Measuring force	Downward mounting	1.0 N*3
Side mounting	0.95 N*3
Upward mounting	0.9 N*3
Sampling cycle	4 ms
Mechanical response	10 Hz*2
Operation indicator light	2-colour LED (red, green)
Environmental resistance	Enclosure rating	IP67G (JIS)4, IP67 (IEC), NEMA Type 134
Ambient temperature	-10 to +55 °C (No freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	1,000 m/s2 (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT, Spindle of GT2-PA12K/PA12: SUS430 (Fluorine coating)
Dust boot	NBR
Contact	SUS304, SUS440C*5
Sensor head cable	Optional (connect to relay connector)
Weight	Approx. 35 g (not including cable)*6
1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased.For details, contact your local sales office. 2 Value when the ambient temperature is 20 °C. 3 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot. This is a representative value when using the GT2-PA12K/PA12 with a pressure of 0.25 MPa. The measuring force varies depending on the air pressure used. For details, see table 1. No dust boots are used with the GT2-PA12K/PA12. 4 When an M8 oil-resistant cable (GT2-CHP2M/CHP5M/CHP10M) is used for the sensor head cable. 5 Contacts are available as options sold separately. 6 Including the relay connector.