Датчик Keyence GT2-PA12L

Stylus type Air cylinder type General-purpose Sensor head (Low measuring force type)

Описание
Получить КП

Model	GT2-PA12L
Detection system	Scale Shot System II, absolute (no tracking errors) type
Measuring range	12 mm
Resolution	0.5 µm
Indicated accuracy	2 µm (P-P)*1
Measuring force	Downward mounting	0.4 N*2
Side mounting	0.35 N*2
Upward mounting	0.3 N*2
Sampling cycle	4 ms
Fluid used	Clean dry air
Operation indicator light	2-color LED (red, green)
Environmental resistance	Enclosure rating	–
Pressure resistance	0.5 MPa
Applied pressure range	0.05 MPa to 0.07 MPa
Ambient temperature	0 to +55 °C (No freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	1,000 m/s2 (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT
Contact	SUS304, SUS440C*3
Sensor head cable	Optional (connect to relay connector)
Weight	Approx. 35 g (not including cable)*4
1 Value when the ambient temperature is 20 °C. 2 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot. This is a representative value when using the GT2-PA12KL/PA12L with a pressure of 0.06 MPa. The measuring force varies depending on the air pressure used. For details, see table 1.No dust boots are used with the GT2-PA12KL/PA12L. 3 Contacts are available as options sold separately. 4 Including the relay connector.

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту info@keyence-datchiki.ru с указанием требуемых позиций и реквизитами компании.