Model	NU-EP1
Name	EtherNet/IPTM Compatible Network Unit
Ethernet Specifications	Compliant standards	IEEE802.3 (10BASE-T), IEEE802.3u (100BASE-TX), IEEE802.3af (c, Class 3)
Transmission rate	10 Mbps (10BASE-T), 100 Mbps (100BASE-TX)
Transmission media	STP cable or Category 3 or higher UTP cable (10BASE-T)*1 STP cable or Category 5 or higher UTP cable (100BASE-TX)
Ethernet	Maximum cable length	100 m (distance between the unit and Ethernet switch)
EtherNet	Max. number of connection stages	4 (10BASE-T) 2 (100BASE-TX)*2
EtherNet/IP™	Compliant functions	Cyclic communication Compatible with UCMM and Class 3 messaging (Explicit messaging)
Number of connections	64
RPI (Transmission cycle)	0.5 to 10,000 ms (in units of 0.5 ms)
Tolerable communication bandwidth for cyclic communication	6,000 pps
Message communication	Supports UCMM, Class 3
Conformance test	Compatible with Version A7
Sensor connection	Connectable sensors	Sensor amplifi ers with N-bus support*3
Number of connectable units	Up to 16 units*4
Power supply	Power is supplied from the unit via a sensor amplifi er connection connector.
Allowable passing current	Total 1,200 mA or less*5
Power during PoE power receiving	Supply voltage: 24 V ±10 %, supply current: 360 mA or less67
Indicator lamp	Link/activity indicator (LINK/ACT): green LED, module status indicator (MS): 2-color (green and red) LED, network status indicator (NS): 2-color (green and red) LED, sensor communication indicator (N-bus): 2-color (green and red) LED
Power voltage	24 VDC ±10 %, ripple (P-P) 10 % or less (with power supply connector) 48 VDC (Max. 57 VDC) (During PoE power receiving)
Power consumption	1,500 mW or less (60 mA max. at 24 V)*8
Environmental resistance	Pollution degree	2
Ambient temperature	-20 to +55 °C (No freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material	Main unit case and dust cover: polycarbonate, power supply connector: polyamide (plug), PBT (socket)
Accessories	Instruction manual, power connector, 2 end units
Weight	Approx. 80 g (including connectors)
1 When using the power PoE power receiving function, use the STP cable or Category 5 or higher UTP cable. 2. The number of connectable units is not limited when using a switch. 2 When using the switch, there is no limit on the number of units that can be connected. 3 “N-bus” is the name of KEYENCE’s wiring-saving system for sensor amplifi ers. 4 Depends on the sensor amplifi ers connected. 5. Value for the current which can be supplied to this unit or to a sensor amplifi er unit connected to this unit. 5 This is the current that can be supplied to the main unit or to the sensor amplifier connected to the main unit. 6 Varies according to the working ambient temperature. (-20 to 45 °C: 360 mA or less, 45 to 50 °C: 260 mA or less, 50 to 55 °C: 140 mA or less) 7 Power which can be supplied to the sensor amplifi er when using the PoE power receiving function. 7 8 Current to be supplied to the connected sensor amplifi er is not included.

Previous product

Датчик Keyence NU-PN1

Next product

Датчик Keyence CZ-40

Датчик Keyence NU-EP1

Communication Unit EtherNet/IP™ Compatible

Описание
Получить КП

Описание

Model	NU-EP1
Name	EtherNet/IPTM Compatible Network Unit
Ethernet Specifications	Compliant standards	IEEE802.3 (10BASE-T), IEEE802.3u (100BASE-TX), IEEE802.3af (c, Class 3)
Transmission rate	10 Mbps (10BASE-T), 100 Mbps (100BASE-TX)
Transmission media	STP cable or Category 3 or higher UTP cable (10BASE-T)*1 STP cable or Category 5 or higher UTP cable (100BASE-TX)
Ethernet	Maximum cable length	100 m (distance between the unit and Ethernet switch)
EtherNet	Max. number of connection stages	4 (10BASE-T) 2 (100BASE-TX)*2
EtherNet/IP™	Compliant functions	Cyclic communication Compatible with UCMM and Class 3 messaging (Explicit messaging)
Number of connections	64
RPI (Transmission cycle)	0.5 to 10,000 ms (in units of 0.5 ms)
Tolerable communication bandwidth for cyclic communication	6,000 pps
Message communication	Supports UCMM, Class 3
Conformance test	Compatible with Version A7
Sensor connection	Connectable sensors	Sensor amplifi ers with N-bus support*3
Number of connectable units	Up to 16 units*4
Power supply	Power is supplied from the unit via a sensor amplifi er connection connector.
Allowable passing current	Total 1,200 mA or less*5
Power during PoE power receiving	Supply voltage: 24 V ±10 %, supply current: 360 mA or less67
Indicator lamp	Link/activity indicator (LINK/ACT): green LED, module status indicator (MS): 2-color (green and red) LED, network status indicator (NS): 2-color (green and red) LED, sensor communication indicator (N-bus): 2-color (green and red) LED
Power voltage	24 VDC ±10 %, ripple (P-P) 10 % or less (with power supply connector) 48 VDC (Max. 57 VDC) (During PoE power receiving)
Power consumption	1,500 mW or less (60 mA max. at 24 V)*8
Environmental resistance	Pollution degree	2
Ambient temperature	-20 to +55 °C (No freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material	Main unit case and dust cover: polycarbonate, power supply connector: polyamide (plug), PBT (socket)
Accessories	Instruction manual, power connector, 2 end units
Weight	Approx. 80 g (including connectors)
1 When using the power PoE power receiving function, use the STP cable or Category 5 or higher UTP cable. 2. The number of connectable units is not limited when using a switch. 2 When using the switch, there is no limit on the number of units that can be connected. 3 “N-bus” is the name of KEYENCE’s wiring-saving system for sensor amplifi ers. 4 Depends on the sensor amplifi ers connected. 5. Value for the current which can be supplied to this unit or to a sensor amplifi er unit connected to this unit. 5 This is the current that can be supplied to the main unit or to the sensor amplifier connected to the main unit. 6 Varies according to the working ambient temperature. (-20 to 45 °C: 360 mA or less, 45 to 50 °C: 260 mA or less, 50 to 55 °C: 140 mA or less) 7 Power which can be supplied to the sensor amplifi er when using the PoE power receiving function. 7 8 Current to be supplied to the connected sensor amplifi er is not included.

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.

Категория: Датчики