Датчик Keyence PX-10CP

Amplifier Unit, Connector Type, PNP

Описание
Получить КП

Model	PX-10CP
Type	Connector type
Output	PNP
Response time	500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)
Output selection	LIGHT-ON/DARK-ON
Indicator lamp	– Operation indicator:Red LED x 2, DSC orange LED x 1 – Dual digital monitor:Dual 7-segment display [Preset value (4-digit green LED) and current value (4-digit red LED) illuminated together, current value range:0 to 65504, excess gain:0 P to 999 P] – Hold function:Possible to display both peak and bottom hold values. Selectable from 5 variations. – Bar LED monitor [Excess gain displayed (85% to 115% in 7 steps)] – Scaling display
Detection mode	Light intensity (automatic sensitivity-tracking function provided)/ [Limit light intensity/output monitor]
Shift function	Variable between –1999 and 9999
Timer function	Timer OFF/OFF-delay/ON-delay/One-shot/ON-delay, OFF-delay/ON-delay, One-shot Timer duration selectable:1 ms to 9999 ms Maximum error against the setting value:10% max.
Control output	PNP open-collector 30 V, 100 mA max. for an output/100 mA max. for two outputs, residual voltage 1 V max.
External input	?
Interference prevention	Up to 4 units (in all power modes)*1
Rating	Power voltage	12 to 24 VDC, Ripple (P-P) 10 % or less, Class 2*2
Power consumption	Standard mode:50 mA max. at 24 V/55 mA max. at 12 V Power saving mode:40 mA max. at 24 V/45 mA max. at 12 V
Environmental resistance	Enclosure rating	IEC: IP67/JEM: IP67/NEMA: 4X
Ambient temperature	-10 to +55 °C (No freezing)*3
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Case material	Housing:PBT, display:PSU, display cover/connector cover:SUS304, radiator plate:SUS304, gasket:NBR
Weight	Approx. 50 g
1 The received light intensity may vary somewhat when the sensor head’s cable layout is changed, so redo the sensitivity setting when changing the layout. The interference prevention function is affected somewhat when using multiple units installed adjacent to each other. Fine-tune the sensitivity (increase the setting) for adjacent layouts. 2 Use a 24 VDC power voltage when using a head light transmitting cable of 3 m or more (PX-H71/H71TZ) or 10 m or more (PX-H72). *3 When using multiple units connected adjacently, the ambient temperature varies with the conditions below. 2 to 4 Units: -10 to +50 °C, 5 to 17 Units: -10 to +45 °C.

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.