Model	GP-M010
Rated pressure	-0.1 to +1 MPa (-1 to +10 bar)
Possible display range	-0.210 to +1.110 MPa (-2.10 to +11.10 bar)
Zero-cut pressure value	±0.5% of F.S.
Burst pressure	15 MPa (150 bar)
Display resolution	0.001 MPa (0.01 bar)
Fluid type	Gas or liquid that will not corrode the liquid contact part
Type of pressure	Gage pressure
Precision	±1.0% of F.S. or less*1
Repeatability	±0.3% of F.S. or less*2
Temperature characteristics	±0.6% of F.S./10°C
Connection diameter	G3/4 (Changes to the R male 1/8, R male 1/4, R male 3/8, G female 1/4, NPT male 1/8, and NPT male 1/4 option adapters are available.)
Box rotation angle	Maximum 330°
Medium temperature	-20 to +100°C (no freezing/condensation)*3
Power supply voltage	10-30 VDC, Ripple (P-P): 10% max, Class 2 or LPS
Current consumption	50 mA or less (when 24 V: 32 mA or less, when 12 V: 48 mA or less. Not including load)*4
Display method	4 column, digital LED, red/Vertical inversion display possible
Operation display light	Operation indicator (output 1) (orange), Operation indicator (output 2) (orange)
Hysteresis	During hysteresis mode: variable (Difference between switch-on point and switch-off point is hysteresis) During window mode: fixed (0.5% of F.S.)
Response	Control output	Selectable from 3 to 5000 ms
Analogue output	As above + 2 ms (90% response)
Output	Output 1 control output	NPN/PNP open collector (Selectable), Max. 250 mA (30 V max) Main unit residual voltage 1 V max, N.O./N.C. selectable
Output 2 replacement type	Control output
Analogue output	4-20 mA, maximum load resistance 500 ? (When the electric voltage is more than 20 V)*5
Environmental resistance	Enclosure rating	IP67
Pressure resistance	4 MPa (40 bar)
Ambient temperature	-20 to +80 °C (No freezing and no condensation)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	IEC60068-2-6 20 G (10 to 2000 Hz, 2 hours each in the X, Y, and Z axes)
Shock resistance	IEC60068-2-27 50G (11 ms, 3 times for each of X, Y and Z direction)
Material properties	Port/diaphragm	Pressure port: SUSXM7, Diaphragm pressure port: Al2O3 (Alumina), O ring: FKM
Other parts	Housing metal portion: SUS304, SUS303, Housing plastic portion: PPSU, Air hole: PTFE, nickel-plated brass.
Applicable cable	M12 connector 4 pin
Weight	Approx. 150 g
1 This is the value when considering linearity + hysterisis + repeatability in a stable environment of 23°C. 2 The repeatability, based on consistent conditions, is the difference in the detection points at the time of fluctuations in the repetition. 3 When the temperature of the piping exceeds 80°C, do not connect the cable. 4 Consumption current including output is 0.6 A and under. *5 The maximum load resistance R will be the values below in response to the electric voltage E. When 10-23V: R = {38 x (E-10) + 128} ? When 23-30V: R = 622 ?

Previous product

Датчик процесса Keyence OP-87272

Next product

Датчик процесса Keyence GP-M025

Датчик процесса Keyence GP-M010

Main Unit, Positive-pressure Type, 1 MPa

Описание
Получить КП

Описание

Model	GP-M010
Rated pressure	-0.1 to +1 MPa (-1 to +10 bar)
Possible display range	-0.210 to +1.110 MPa (-2.10 to +11.10 bar)
Zero-cut pressure value	±0.5% of F.S.
Burst pressure	15 MPa (150 bar)
Display resolution	0.001 MPa (0.01 bar)
Fluid type	Gas or liquid that will not corrode the liquid contact part
Type of pressure	Gage pressure
Precision	±1.0% of F.S. or less*1
Repeatability	±0.3% of F.S. or less*2
Temperature characteristics	±0.6% of F.S./10°C
Connection diameter	G3/4 (Changes to the R male 1/8, R male 1/4, R male 3/8, G female 1/4, NPT male 1/8, and NPT male 1/4 option adapters are available.)
Box rotation angle	Maximum 330°
Medium temperature	-20 to +100°C (no freezing/condensation)*3
Power supply voltage	10-30 VDC, Ripple (P-P): 10% max, Class 2 or LPS
Current consumption	50 mA or less (when 24 V: 32 mA or less, when 12 V: 48 mA or less. Not including load)*4
Display method	4 column, digital LED, red/Vertical inversion display possible
Operation display light	Operation indicator (output 1) (orange), Operation indicator (output 2) (orange)
Hysteresis	During hysteresis mode: variable (Difference between switch-on point and switch-off point is hysteresis) During window mode: fixed (0.5% of F.S.)
Response	Control output	Selectable from 3 to 5000 ms
Analogue output	As above + 2 ms (90% response)
Output	Output 1 control output	NPN/PNP open collector (Selectable), Max. 250 mA (30 V max) Main unit residual voltage 1 V max, N.O./N.C. selectable
Output 2 replacement type	Control output
Analogue output	4-20 mA, maximum load resistance 500 ? (When the electric voltage is more than 20 V)*5
Environmental resistance	Enclosure rating	IP67
Pressure resistance	4 MPa (40 bar)
Ambient temperature	-20 to +80 °C (No freezing and no condensation)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	IEC60068-2-6 20 G (10 to 2000 Hz, 2 hours each in the X, Y, and Z axes)
Shock resistance	IEC60068-2-27 50G (11 ms, 3 times for each of X, Y and Z direction)
Material properties	Port/diaphragm	Pressure port: SUSXM7, Diaphragm pressure port: Al2O3 (Alumina), O ring: FKM
Other parts	Housing metal portion: SUS304, SUS303, Housing plastic portion: PPSU, Air hole: PTFE, nickel-plated brass.
Applicable cable	M12 connector 4 pin
Weight	Approx. 150 g
1 This is the value when considering linearity + hysterisis + repeatability in a stable environment of 23°C. 2 The repeatability, based on consistent conditions, is the difference in the detection points at the time of fluctuations in the repetition. 3 When the temperature of the piping exceeds 80°C, do not connect the cable. 4 Consumption current including output is 0.6 A and under. *5 The maximum load resistance R will be the values below in response to the electric voltage E. When 10-23V: R = {38 x (E-10) + 128} ? When 23-30V: R = 622 ?

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.

Категория: Датчики процесса