Model	IM-6600F
Type	Controller
Image sensor	1″ 6.6 mega pixel CMOS
Display	10.4″ LCD monitor (XGA: 1024 ? 768) External monitor connectable (clone output)
Receiver lens	Double telecentric lens
Image measurement	Field of view	Wide field: o100 ? 200 mm, High precision: 25 ? 125 mm
Minimum display unit	0.1 µm
Repeatability	W/o stage movement	Wide field: ±1µm High precision: ±0.5µm
With stage movement	Wide field: ±2µm High precision: ±1.5µm
Measurement accuracy (±2?)	W/o binding	Wide field: ±5µm1 High precision: ±(7+0.02L)µm2
With binding	Wide field: ±2µm3 High precision: ±(4+0.02L)µm4
External remote input	No-voltage input (with contacts, without contacts)
External output	OK/NG/FAIL/MEAS.	Relay outputRated load 24 VDC 0.5AON resistance 50 m? or less
Interface	LAN	RJ-45 (10BASE-T / 100BASE-TX / 1000BASE-T)
USB 2.0 series A	6 ports (front: 2, rear: 4)
Record	Hard disk drive	250 GB
Illumination system	Transparent	Telecentric transparent illumination (Green LED)
Ring	Four division ring illumination (White LED)
External	Externally connected illumination
X stage	Moving range	100 mm (electric)
Withstand load	2 kg
Z stage	Moving range	30 mm (electric)
Measurement points	99 points max. (99 ? 9 points possible when the function for consolidating measurement settings is used)
Pattern search (profi le tracking function)	XY? (with 360° rotary position compensation)
Pattern registration	1000 patterns or more*5
Measurement time	2 seconds*6
Basic measurement function	Distance measurement	8 types (point-point / line-point / line-line / circle-point / circle-line / circle-circle / circle / arc)
Angle measurement	Provided
Calculation
Virtual line function	Point	Middle point / intersection
Conjunction edge	Line conjunction / circular conjunction
Line	6 types (midline / perpendicular line / parallel lines / tangent line / line passing through a point / approximate line)
Circle	Middle circle / approximate circle / auxiliary circle / inscribed and circumscribed circle
Application tool	Pitch measurement	Line / circumference
Pitch angle
Width measurement	Edge width
Thickness measurement	Thickness measurement / gap measurement between inner and outer diameters
Special tool	Rounded corner / curved surface / oval / reticle / point position / perimeter / area / screw / automatic measurement
GD&T	Shape tolerance	Straightness / circularity / profile
Orientation tolerance	Squareness / parallelism
Position tolerance	Point position / concentricity
Element tool	Point	Point (on a line or arc) / maximum and minimum (rectangle, circle, arc)
Line	Line / centre line / peak line
Circle	Circle / arc / peak circle / peak arc
Profi le extraction	Provided
Special tool	Automatic generation / gauge line
Manual measurement	Provided
Coordinate system confi guration
Batch confi guration of tolerance
Element list editing
Measurement setting data binding function
DXF export function
Automatic measurement function
Q-DAS data save function
Measurement settings support functions	Provided*7
Power supply	Power voltage	100 to 240 VAC 50 / 60 Hz
Power consumption	310 mA or less
Environmental resistance	Ambient temperature	+10 to +35 °C
Relative humidity	20 to 80 % RH (No condensation)
Weight	Approx 8 kg
1 In the range of o80 mm from the centre of the stage within the operating temperature range of +23°C ±1°C at the focused focal point position 2 In the range of o20 mm from the centre of the stage within the operating temperature range of +23°C ±1°C at the focused focal point position 3 In the range of o80 ? 180 mm from the centre of the stage, within the operating temperature range of +23°C ±1°C at the focused focal point position, and with a load weighing 1 kg or less on the stage (L = amount of stage movement in mm units) 4 In the range of o20 ? 120 mm from the centre of the stage, within the operating temperature range of +23°C ±1°C at the focused focal point position, and with a load weighing 1 kg or less on the stage (L = amount of stage movement in mm units) 5 Depending on the measurement setting data and number of data pieces being stored 6 Without pattern search, applied measurement, and stage movement *7 Optimum lighting guide, optimum lighting search, automatic edge extraction parameter adjustment function, and multiple edge extraction function

Previous product

Измерительная система Keyence IM-6020

Next product

Измерительная система Keyence IM-6225T

Измерительная система Keyence IM-6600F

Controller French Display Type

Описание
Получить КП

Описание

Model	IM-6600F
Type	Controller
Image sensor	1″ 6.6 mega pixel CMOS
Display	10.4″ LCD monitor (XGA: 1024 ? 768) External monitor connectable (clone output)
Receiver lens	Double telecentric lens
Image measurement	Field of view	Wide field: o100 ? 200 mm, High precision: 25 ? 125 mm
Minimum display unit	0.1 µm
Repeatability	W/o stage movement	Wide field: ±1µm High precision: ±0.5µm
With stage movement	Wide field: ±2µm High precision: ±1.5µm
Measurement accuracy (±2?)	W/o binding	Wide field: ±5µm1 High precision: ±(7+0.02L)µm2
With binding	Wide field: ±2µm3 High precision: ±(4+0.02L)µm4
External remote input	No-voltage input (with contacts, without contacts)
External output	OK/NG/FAIL/MEAS.	Relay outputRated load 24 VDC 0.5AON resistance 50 m? or less
Interface	LAN	RJ-45 (10BASE-T / 100BASE-TX / 1000BASE-T)
USB 2.0 series A	6 ports (front: 2, rear: 4)
Record	Hard disk drive	250 GB
Illumination system	Transparent	Telecentric transparent illumination (Green LED)
Ring	Four division ring illumination (White LED)
External	Externally connected illumination
X stage	Moving range	100 mm (electric)
Withstand load	2 kg
Z stage	Moving range	30 mm (electric)
Measurement points	99 points max. (99 ? 9 points possible when the function for consolidating measurement settings is used)
Pattern search (profi le tracking function)	XY? (with 360° rotary position compensation)
Pattern registration	1000 patterns or more*5
Measurement time	2 seconds*6
Basic measurement function	Distance measurement	8 types (point-point / line-point / line-line / circle-point / circle-line / circle-circle / circle / arc)
Angle measurement	Provided
Calculation
Virtual line function	Point	Middle point / intersection
Conjunction edge	Line conjunction / circular conjunction
Line	6 types (midline / perpendicular line / parallel lines / tangent line / line passing through a point / approximate line)
Circle	Middle circle / approximate circle / auxiliary circle / inscribed and circumscribed circle
Application tool	Pitch measurement	Line / circumference
Pitch angle
Width measurement	Edge width
Thickness measurement	Thickness measurement / gap measurement between inner and outer diameters
Special tool	Rounded corner / curved surface / oval / reticle / point position / perimeter / area / screw / automatic measurement
GD&T	Shape tolerance	Straightness / circularity / profile
Orientation tolerance	Squareness / parallelism
Position tolerance	Point position / concentricity
Element tool	Point	Point (on a line or arc) / maximum and minimum (rectangle, circle, arc)
Line	Line / centre line / peak line
Circle	Circle / arc / peak circle / peak arc
Profi le extraction	Provided
Special tool	Automatic generation / gauge line
Manual measurement	Provided
Coordinate system confi guration
Batch confi guration of tolerance
Element list editing
Measurement setting data binding function
DXF export function
Automatic measurement function
Q-DAS data save function
Measurement settings support functions	Provided*7
Power supply	Power voltage	100 to 240 VAC 50 / 60 Hz
Power consumption	310 mA or less
Environmental resistance	Ambient temperature	+10 to +35 °C
Relative humidity	20 to 80 % RH (No condensation)
Weight	Approx 8 kg
1 In the range of o80 mm from the centre of the stage within the operating temperature range of +23°C ±1°C at the focused focal point position 2 In the range of o20 mm from the centre of the stage within the operating temperature range of +23°C ±1°C at the focused focal point position 3 In the range of o80 ? 180 mm from the centre of the stage, within the operating temperature range of +23°C ±1°C at the focused focal point position, and with a load weighing 1 kg or less on the stage (L = amount of stage movement in mm units) 4 In the range of o20 ? 120 mm from the centre of the stage, within the operating temperature range of +23°C ±1°C at the focused focal point position, and with a load weighing 1 kg or less on the stage (L = amount of stage movement in mm units) 5 Depending on the measurement setting data and number of data pieces being stored 6 Without pattern search, applied measurement, and stage movement *7 Optimum lighting guide, optimum lighting search, automatic edge extraction parameter adjustment function, and multiple edge extraction function

Получить КП

Для получения коммерческого предложения, пожалуйста, вышлите ваш запрос на электронную почту [email protected] с указанием требуемых позиций и реквизитами компании.

Категория: Измерительные системы

Измерительная система Keyence IM-6600F

Измерительная система Keyence VK-H1XAE

Измерительная система Keyence OP-88249

Измерительная система Keyence VK-H1XMD

Измерительная система Keyence VK-H1A1E

Измерительная система Keyence VK-H1XVE

Измерительная система Keyence 972075

Измерительная система Keyence VK-H1XJE

Измерительная система Keyence VK-H1G1E

Измерительная система Keyence IM-6600F

Похожие товары